Quick Details

• Place of Origin:

  China

• Samples:

  Not Available

• Export Ratio:

  91% - 100%

• OE Experience:

  No

Product Name:J2534 Multi-Diag Access J2534 Pass-Thru Multi-Diag Obd2 Device

J2534 Multi-Diag Access J2534 Pass-Thru Multi-Diag Obd2 Device

Application

Bentley, Changfeng, DADI Auto

Product Description:

J2534 Multi-Diag Access is also known as Multi-Di@g Access. Multi-Diag Pass Thru Device Software version is 2010I. J2534 Pass-Thru Multi-Diag is 100% percent compatible with Pass thru+ XS and AUTODATA CD.

J2534 Multi-Diag Access J2534 Pass-Thru Multi-Diag obd2 device
Multi-Diag Access J2534 PassThru 2010I Actia Multidiag J2534 USB

Note: This version Multi-diag J2534 resolved NO VCI FOUND problem

2010-II Multi Di@g Access J2534 VCI serial number

During installation, when Multi-Di@g configuration window appears, you should set communication interface to USB and set VCI serial number to 093479, Then send us a ID like: 23-45677A2CVD
After get the ID, we will send the activation code to you. During the diagnostic with the device connected, warning about 0 days left will appear. Just check the mark Do not display this message again and continue the work, everything will be working ok.

Latest Multi-Di@g Access J2534 Pass-Thru OBD2 Device

VCI Number: 093479
Connection:  USB Cables

How to install Multi Diag Access J2534 Device Software.pdf

Multi-Diag Access Software version: 2010 I

Multi-Diag Access Language:

Bulgarian, Croatian, Czech, Danish, Dutch, English, Finnish, French, German, Hebrew, Hungarian, Italish, Polish, Portuguese, Romanian, Russian, Serbian, Slovenian, Spanish, Swedish, Turkish.

Multi-Di@g Access J2534 details

Multi-Di@g Access J2534 Pass-Thru Device is a VCI (vehicle communication Interface) enabling you to communicate with the ECU's according to the J2534 & J2534-1 specifications. Beside ECU reprogramming, with the help of Multi-Di@g Office software vehicle diagnostic, maintenance and repair operations can be done in just a few clicks without being an electronic expert. More than 45 brands, a lot of new vehicles, a large deepness in diagnostic functions!
 
Multi-Diag Access Characters:

ully compliant to SAE J2534 & J2534-1
Either RS 232 or USB interfaces to PC
K-Line ISO 9141 (100 mA)
KWP 2000 ISO 14230-4
SAE J1850 PWM
SAE J1850 VPW
CAN 2.0B ISO 11898
CAN ISO 15765-4
SCI SAE J2610
Programmable power supply
On-board memory
 
Multi-Diag Access Functions:

After selecting the car manufacturer, then you can make the diagnosis for the different menus on offer (depending on cars models):

- Maintenance
Diagnosis codes from all computers
Reset maintenance interval
Modification of the sewage
Read / erase fault calculators
Maintenance of the particulate filter

- Air Conditioning
Diagnosis of cooling electronic
Reading settings cooling circuit,
Test servo actuators

- Pollution control
Diagnosis of the particulate filter
Electronic control of pollutant emissions
Control of the Lambda probe

- Liaison to the ground
Electronic configuration of the size of tires,
Electronic configuration of tires (winter / summer),
Setting valves tire pressure
Diagnosis and management of shock-driven
Calibration of the sensor angle Driving (initialization of the steering angle)

- Body
Implementation of safety airbags (lock / unlock)
Reconfiguration of a new calculator Airbag,
Diagnosis of calculators Airbag,
Rain sensor windshield (reading and erasing fault)
Test panel and activators of lights,
Setting Xenon headlights,
Rear radar

- Post-Equipment
Setting up the radio,
Configuration loader CD,
Setting alarms
Configuration of the coupler,
Configuration bicycle loading system,

- Braking,
Diagnosis of calculators ABS, ESP,
Diagnosis and unlock electric brakes,
Flush the brake system,

- Motor,
Diagnosis of any calculator injection engine (diesel, gasoline, flexfuel, etc. ..)
Programming of injectors,
Electronic configuration of the EGR valve

- Expert Mode,
Diagnosis of advanced computers,
Configuration of comfort functions,
Change the language of the instrument panel,
physical measures (option with a probe - not supplied)
Direct access to all functions of diagnosis.

Please pay attention: this product is not good at programming function.

Multi-Diag Access Package including:

VCI (Vehicle Communication Interface)
DB25 to OBD-2 Male cable
OBD2 Male to OBD2 Female cable
DIN6 to USB cable
DIN6 to DB9F cable

Autodiagnosticobd.com have developed a vast collection of Auto diagnostic tools, Car key programmer, ECU chip tuning, Odometer Correction, Locksmith tools. We develope a long lasting connection with factories, distributors and warehouses in China and our products price is reasonable and ...[Read More]

Company Profile:

• Main Product:

  Autodiagnostictool, Car Key Programmer

• Business Type:

  Distributor/Wholesaler

• Current Export Market:

  North America, South America, Western Europe, Eastern Europe, Eastern Asia, Southeast Asia, Mid East, Africa, Oceania