Quick Details

• Place of Origin:

  China

• Samples:

  Charge

• Sample Price:

  209

• Delivery Time:

  Within 2 Working Days

• Export Ratio:

  81% - 90%

• OE Experience:

  No

Product Name:Toyota Copy Key

Toyota Copy Key

Application

toyota

Product Description:

toyota copy key

skype is amanda924fung

Description:
This adapter can be used to read the pin code of the transponder key 

automatically, and write the pin code into the computer transponder of the 

suited ECU. It can be used to match the vehicle without keys and needn't 

change any computer when matching. Be suitable for all the Toyota Series

 from 1997 to 2005.
Be suitable for the wafer key's match of Toyota, such as LEXUS (LS400 ES300

 GS300 IS2000 IS300) , Camry 2. 0, 2. 4, JEEP 2007 3400 4500 4700, AVALON,

 PREVIA.
Equip English using manual. Offer technology support.

Operations of key programmer:
Dismantle the engine ECU from the vehicle (or IMMO) , and take down the IC 

chip identified as "93C56" (fixed to the computer in the vehicle engine; for the

 Camry being IC601, and Lexus being IC900. Identification number for a chip 

fixed to IMMO is 93LC66) . Clean up every pin of IC to make sure of a sound

 connection.

Install 93C56 on the device through programmer; make sure that the 

connection is good.
Supply electricity to the programmer, the screen will show"can work normal"

with a beep sound indicating that the machine is working well.
Press"R-key", and the red light"LED" will be lit; programmer is thus ready for 

programming.

Put the key on the key logo of the programmer.
Press R-key again to hear the beep sound beep 4 times, and the red light also goes off,

 these means that the key has been successfully programming to the 

programmer. If the beep sound is not made 4 times, then repeat the operation

 until you hear the exact 4 beep sound.
By the stated operations you can programming 3 keys to the programmer 

altogether.

Now you can verify whether the 3 keys have been actually programmed: press 

R-key, put a key near the key logo, if a 4-beep sound is made, that means the programming is effective. Every key must

 be verified so that they can be program to 93LC56 and 93LC66.
Press Pr-A, Pr-B and Pr-C orderly to programming the 3 programmed keys to 93C56 (or 93LC66) . 

When "OK" displays, the programming succeeds; otherwise"ERROR" signal 

appears. Failure may be due to misconnection between 93C56 and the

 programmer, or the reverse installation or corruption of the chip. In this case 

you better repeat the adaptation twice to ensure the success.

Now that IC-93C56 (or 93LC66) has three keys programed to it, you can now weld it to the 

engine ECU. Make sure the weld is good.
Fit the ECU back to the vehicle. With any of the previously programmed keys 

you can start the vehicle now.

Notice: This machine only provide for locksmiths. Please offer related 

business license, original ID card and need to sign the declaration with us.
 

Major Products and Services:auto diagnostic tools, car diagnostic scanner,

 auto scanner,BMW GT1,BMW ISID,MB star,bmw ops,vagcom 106,renault can

 clip diagnostic interface, UCM Diagnostic platform, Digital battery tester,ad-1 auto scanner, MVP, Compact 4, X431,Autoboss V30

Shenzhen ZEUS TECHNOLOGY CO.,LTD is the leading manufacturer of automotive and motorcycle diagnostic equipment by adopting the latest automotive/motorcyle through continuous research and direct marketing. Through our many years of service to the automotive aftermarket, we understand the pains ...[Read More]

Company Profile:

• Main Product:

  Diagnostic Tool, Code Reader, Odometer Correction Tool, Car Lift, Engine Fuel Injector Tester & Cleaner, Wheel Balancer, Tyre Changer, Four Wheel Alignment, Auto A/ C Refrigerant Recharging Machien.

• Business Type:

  Manufacturer

• Current Export Market:

  North America, South America, Western Europe, Eastern Europe, Eastern Asia, Southeast Asia, Mid East, Africa, Oceania

• Total Annual Sales:

  USD 2,000,001 - 5,000,000

Factory Profile:

• Number of Employees:

  51 - 100 People

• Shift:

  3

• Size of Factory In Square Meters:

  500

• Certification:

  CE, CE, CE, CE, CE

Research & Development:

• Capability for Synchronized Development:

  Develop according to drawing or samples provided by clients?Yes

  Develop 3-D model and prototype according to client's needs?Yes

• Lead Time for New Product Development:

  1

• Tooling Design:

  Design Internally

• Source of Tooling:

  Made Internally

• Software/Profile:

  AUTOCAD