Mercedes CAN filter
1. Mercedes ML W164, GL X164, R-class W251 installation instructions
In these models Mercedes use 2 kinds of EZS (also named EIS-electronic ignition switch): in older cars <2007 - with 9S12 processor, in new cars 2007+ - EZS with AMAZONAS processor. Mercedes CAN filter will work with both EZS types. For installation remove EZS from car.
For first prepare Mercedes CAN filter board: remove resistor marked in picture and solder first configuration points. Use fine KYNAR wire for installation.
Remove from EZS board SMD part marked with red X. With short, good isolated wire connect Mercedes CAN filter to EZS board according picture: 1-1 (C1H), 2-2(C1L), 3-3(C2H), 4-4(C2L), 5-5(GND), and 6-6 (+5V).
Mercedes ML W164, GL X164, R-class W251 Type 1:
Mercedes ML W164, GL X164, R-class W251 Type 2:
After connection insulate Mercedes CAN filter board with heat shrink or insulation tape. Put it carefully
to EZS casing.
2. Mercedes C-class W204 installation instructions.
In these models Mercedes use new EZS with NEC processor marked IRLAND or HAVANNA (also
named EIS-electronic ignition switch). Mercedes CAN filter will work with both EZS types. For
installation remove EZS from car.
For first prepare Mercedes CAN filter board: check - resistor 121 must be soldered and
solder second configuration points like in pictures.
Remove EZS board from casing. Carefully disconnect board from mechanic look on picture.
Remove from EZS board SMD part marked with red X. With short, good isolated wire connect Mercedes CAN filter to EZS board according picture: 1-1 (C1H), 2-2(C1L), 3-3(C2H), 4-4(C2L), 5-5(GND), and 6-6 (+5V).
After connection insulate Mercedes CAN filter board with heat shrink or insulation tape. Put it carefully to EZS casing.
3. Mercedes E-class W212 installation instructions.
In these models Mercedes use new EZS with NEC processor marked JURA (also named EIS-electronic ignition switch). Mercedes CAN filter will work with both EZS types. For installation remove EZS from car.
For first prepare Mercedes CAN filter board: check - resistor 121 must be soldered and solder second configuration points like in pictures.
Remove EZS board from casing. Carefully disconnect board from mechanic look on picture.
Remove from EZS board SMD part marked with red X. With short, good isolated wire connect Mercedes CAN filter to EZS board according picture: 1-1 (C1H), 2-2(C1L), 3-3(C2H), 4-4(C2L), 5- 5(GND), and 6-6 (+5V).
After connection insulate Mercedes CAN filter board with heat shrink or insulation tape. Put it carefully to EZS casing.
4. Mercedes S-class W221 installation instructions
Mercedes W221 use new EZS with NEC processor marked IRLAND or HAVANNA (also named EISelectronic ignition switch). Mercedes CAN filter will work with both EZS types. For installation remove EZS from car.
For first prepare Mercedes CAN filter board: check - resistor 121 must be soldered and solder second configuration points like in pictures.
Remove from EZS board SMD part marked with red X. With short, good isolated wire connect Mercedes CAN filter to EZS board according picture: 1-1 (C1H), 2-2(C1L), 3-3(C2H), 4-4(C2L), 5- 5(GND), and 6-6 (+5V).
Mercedes S-class W221 Type 2:
Related Product Tags:
adaptor , adaptors , auto adaptor , auto adaptor asm , Cigarette Lighter Adaptor , tv adaptor , airbag reset , airbag resetting , vag airbag reset tool , srs airbag reset , airbag reset tool , oil light airbag reset tool , mb airbag reset tool , airbag reseter , analyze , Battery Detector , Beepro Programmer , boost