mazda key programmer
Mazda Key Programmer Support Models:
M2 M3 M5 and CX-7, matching method: Instrument to be removed or 93C56 read 93c66IC
Using Steps:
1.Removed the original car dashboard.
2.Welding 93C56 or under 93c66 (M2), to deal with a clean pin.
3.With the ordinary programmer to read data backup.
4.Anti-theft chip to match the adapter on
5.Connected to match the instrument power supply, two LED light
6.Pressing the A button, and red means the LED, equipment EEPROM data read, read the right LED flashes green.
7.Add the original car keys (if any need to Add the original car keys), press B button, green LED to eliminate. Read the key data and do analysis of data will be written into the EEPROM to write the key or not. If the green LED light to operate successfully. If the key data during the read error, read or write data and the data is not the same as the red LED light will appear, press any key at this time will be reset tool.
8.Add sub-key, according to B button, green LED to eliminate. Read the key data and do analysis of data will be written into the EEPROM to write the key or not. If the operation is successful the green LED and red LED is bright. Ibid if error.
9.Turn off power, remove the EEPROM.
Related Product Tags:
adaptor , adaptors , auto adaptor , auto adaptor asm , Cigarette Lighter Adaptor , tv adaptor , airbag reset , airbag resetting , vag airbag reset tool , srs airbag reset , airbag reset tool , oil light airbag reset tool , mb airbag reset tool , airbag reseter , analyze , Battery Detector , Beepro Programmer , boost