1)12m long big spray booth for bus or truck
2)OEM is available
3) with more than 20 years'experence
big spray booth for bus or truck
Spray Booth BD1230-12000
Medium size Bus Spray Booth Technical Specifications:
External dimensions (mm) (L) 12125 x (W) 8400 x (H) 5000
Interior dimensions (mm) (L) 12000 x (W) 5000 x (H) 4400
Vehicle Entrance dimensions (mm) (W) 4000 x (H) 4400
Blower capacity (m3 /h) 40000
Booth interior air speed (m/s) 0.4
Operating Temperature (°C) 60 ~ 80
Diesel fuel consumption (kg/h) 25~30
Raising Temperature(40~80°C) 5~15 minutes
Power Consumption (kW) 7.5KWX4
Noise level (dBA) <80
Suitable vehicle types: Passenger Cars and Vans
(Follow the passenger car /van model)
Main features:
1. Booth design: The booth panels are made of steel and plastic plates with injected fillings of heat insulation foam materials in the middle section. This provides better heat retention and sound proofing.
The booth ceiling panels are made of rigid folded electro-galvanized steel plates frame. All the panel joints are lined with aluminum strips which provide better sealing.
2. Door design: The booth front entrance has three doors (foldable) and one safety exit / service door at the side. All doors were made by bending methods and the middle sections are reinforced with 1.5mm thick steel plates frame. During installation M8 bolts and nuts are needed to fix-up. The sight glass is of oblong shaped.
3. Air intake system: Utilizes one unit (15” x 15”) rotary fan couple with 7.5KW motor drive unit. The heat exchanger is made of stainless material thickness of 1.5mm which features more heat dissipating surface, better heat exchange and better burner efficiency. The burner is an Italian made brand “RIELLO” model 40-G20 and the air valve uses “BELIMO” electronic control unit.
4. Air exhausts system: Consists of 2 filters and one unit (15”x 15”) rotary fan couple with 7.5KW motor drive unit.
To meet the Environment Protection Agency requirements, the followings can be used(optional):Activated carbon filter system – which will provide better filtering of harmful exhaust gas from the burner and gases from paint solvents that meets the EPA standards.
Water filter system – which will effectively remove the air borne paint and dust that, meets the operator’s requirement.
With the combination of the two systems incorporated, the discharged air will meets the National EPA standard.
5. Lighting system: At both (left and right) corners of the booth ceiling, there are 6 sets of 45 degree mounted lightings. Each set consist of 3 pieces 40W lamps. At the middle section of booth (left and right) side panels, there are 6 sets of lightings. Each set consist of 2 pieces 20W lamps. Finally at the mid-section of the rear end of the booth have 2 sets super bright lights.
6. Ceiling filter system: Utilizes wool type filters which filter out 99% dust which ensure that the air entering the booth interior is virtually dust free. The filter frames precisely fabricated to ensure better sealing and easy filter replacement.
7. Side filter system: All around filter under wall panels for air exhaust .
8. Control system: Baking process - Auto temperature control and auto-shut off after completion.
Related Product Tags:
atv winch , balancer , tire balancer , weight balancer , lead weight balancer , car bench , car wash equipment , car wash machine , reciprocating car wash machine , car wash system , car washer , mini car washer brushing scrubber , mini car washer , car washer equipment , car washing machine , circulating bath , circulating water vacuum pump , collecting waste oil changer