Global Auto Parts & Accessories Marketplace
Home » Product Directory » Material And Equipment » Repair Tools »

ELNEC Beeprog Universal Eprom Programming System

    • Application: Unversal
    • Market Type:After Market 
    • FOB Price: Inquiry For It?
    • Payment Terms: T/T
    • Minimum Order: 1

Quick Details

  • Delivery Time:

    In 1 day

  • Packing:

    standrad package

  • Delivery Port:

    Shenzhen

  • Max. Production Capacity:

    300 piece /week

  • OE Experience:

    No

Product Name:ELNEC Beeprog Universal Eprom Programming System

ELNEC Beeprog Universal Eprom Programming System

Application

Unversal

Product Description:

ELNEC Beeprog Universal Eprom Programming System

BeeProg is the first des USB-compatible universal programmer by ELNEC, supporting Windows® 95/98/Me/NT/2000/XP. Programming is extremely fast because of using the new hardware on FPGA-b. 48 universal pin-drivers set peaks pull-up/pull-down-modes, The BeeProg can be connected with pc AT-386-486-Pentium®-PS/2-Portable and notebooks by the USB-port (2.0) or parallel-port (IEEE1284). The BeeProg also can do In-Circuit-Programming (the ISP-cabel is included). When connecting a device, the BeeProg checks if it is connected correctly and if all pins have good contact. Internal security mechanisms prevent destruction of the device under any conditions. BeeProg includes: programmer, diagnostic-POD, power supply, pc connection cable, ISP-cable, dust protection cap for ZIF socket, software on cd and manuals.

Short description:
29278 supported devices by 2.35 version of SW (Feb. 08, 2007)
extremely fast programming, one of the fastest programmers in this category. Programs 16-Mbit Flash memory less than 18 seconds
48-pins powerful pindrivers, no adapter required for any DIL devices
connector for in-circuit programming (ISP) dual connection to PC: USB or parallel (printer) port USB 2.0/1.1 compatible interface
alternatively high-speed IEEE 1284 (ECP/EPP) printer-port (LPT) interface comfortable and easy to use control program, Windows 95/98/Me/NT/2000/XP/2003/XPx64 compatible

Features
GENERAL
First member of new USB-compatible generation of Windows 95/98/ME/NT/2000/XP/2003/XP64 based ELNEC universal programmers built to meet the strong demand of the developers community for the fast and reliable universal programmer. Supports all kinds of types and silicon technologies of today and tomorrow programmable devices without family-specific module. You have freedom to choose the optimal device for your design. Using built-in in-circuit serial programming (ISP) connector, the programmer is able to program ISP capable chips in circuit. BeeProg isn't only a programmer, but also a tester of TTL/CMOS logic ICs and memories. Furthermore, it allows generation of user-definable test pattern sequences. Provides very competitive price coupled with excellent hardware design for reliable programming. Probably best "value for money"programmer in this class.
Very fast programming due to high-speed FPGA driven hardware and execution of time-critical routines inside of the programmer. At least fast than competitors in this category, for many chips much faster than most competitors. As a result, when used in production this one-socket-programmer waits for an operator, and not the other way round. BeeProg interfaces with the IBM PC 486 compatible or higher, portable or desktop personal computers through USB (2.0/1.1) port or any standard parallel (printer) port. Programmer also supports IEEE1284 (ECP/EPP) high-speed parallel port. Support of both USB/LPT port connection gives you the choice to connect the BeeProg programmer to any PC, from latest notebook to older desktop without USB port.

EEPROM: NMOS/CMOS, 28xxx, 28Cxxx, 27EExxx series, with 8/16 bit data width
Flash EPROM: 28Fxxx, 29Cxxx, 29Fxxx, 29BVxxx, 29LVxxx, 29Wxxx, 49Fxxx series, from 256Kbit to 1Gbit, with 8/16 bit data width, full support for LV series
Serial E(E)PROM: 24Cxxx, 24Fxxx, 25Cxxx, 45Dxxx, 59Cxxx, 25Fxxx, 25Pxxx, 85xxx, 93Cxxx, NVM3060, MDAxxx series, full support for LV series
Configuration (EE)PROM: XCFxxx, XC17xxxx, XC18Vxxx, EPCxxx, AT17xxx, 37LVxx
1-Wire E(E)PROM: DS1xxx, DS2xxx
PROM: AMD, Harris, National, Philips/Signetics, Tesla, TI
NV RAM: Dallas DSxxx, SGS/Inmos MKxxx, SIMTEK STKxxx, XICOR 2xxx, ZMD U63x series
PLD: Altera: MAX 3000A, MAX 7000A, MAX 7000B, MAX 7000S, MAX7000AE, MAX II
PLD: Lattice: ispGAL22V10x, ispLSI1xxx, ispLSI1xxxEA, ispLSI2xxx, ispLSI2xxxA, ispLSI2xxxE, ispLSI2xxxV, ispLSI2xxxVE, ispLSI2xxxVL, LC4xxxB/C/V/ZC, M4-xx/xx, M4A3-xx/xx, M4A5-xx/xx, M4LV-xx/xx

Send your message to this supplier:

logo Ms. Hellen Peng
Enter between 20 to 3,000 characters, English only.

Supplier Details

Shenzhen HD Technology Co. , Ltd

Market Type: After Market 
Business Type: Manufacturer
Main Product: Benz Star, Bmw Gt1, Bmw Ops, Lexia 3, Vas 5054, Volvo Vida Dice, Autoboss V30, Pc Max, X431 Master, Toyota It2, Mb Star, ...

You May Like:

Bmw GT1 Dis V57 Sss V32 Bmw Diagnostic Tools Auto ... Application: Bmw/ 3 Series(ch ...
Digimaster II Digimaster 2 Odometer Adjusting Car ... Application: Toyota/ Previa; ...
Ak90 Key Programmer, Bmw Key Programming Application: Bmw/ 3 Series(ch ...
Repair Kits 2 417 010 001 Application: Isuzu, Kamatsu, ...
OEM No: 2 417 0 ...
Common Rail Injector Seal Kits F00VC99002 Application: BOSCH
OEM No: F 00V C ...
Beiben Truck, North Benz Direction Machine ZF8098 ... Application: North Benz, Beib ...
OEM No: ZF8098 ...
DAF Truck Repair Kit, Steering Gear 1612046 Application: DAF CF/XF Series ...
OEM No: 1612046
REPAIR TOOL(7 PCS GW413EF ENGINE)9100694 Application: Great wall
OEM No: 9100694
Parts Of Pneumatic Tools Application: NO BRAND
Didn't find what you are looking for?
Please send us Your Search Requirement, or you can Post a Buying Lead,
suppliers may contact you actively.

Send Message