1The new Mercedes device working with smart key (old and new) using in car since 1997 up to 2005 - Without keylessgo system. 2You can program new key (ore used) in car and program oun key if its not work more.
3You read and program eeprom of CPU from Steering blocking module via Diagnostic connector.
4Desolder and read via programmer two CPU from Electronic Ignition Control Module.
5Load theese eeproms to program.
6Desolder NEC CPU from the key.
7Soldering it on the device , Select the No of key and program it.
8Solder all CPU on their places and start the car.
9You can program new keys without the car - Only with EIS and steering blocking module.
10You can read these CPU with help ETL programmer for Motorolla CPU 68HC705X16(32).
Related Product Tags:
adaptor , adaptors , auto adaptor , auto adaptor asm , Cigarette Lighter Adaptor , tv adaptor , airbag reset , airbag resetting , vag airbag reset tool , srs airbag reset , airbag reset tool , oil light airbag reset tool , mb airbag reset tool , airbag reseter , analyze , Battery Detector , Beepro Programmer , boost