Product Name:Ignition System Quick Tester Oas750

Ignition System Quick Tester Oas750

Application

Auto

Product Description:

Product Name: Ignition System Quick Tester OAS750 Part No. : Net Weight: The Coil On Plug (COP) Quick Ignition tester is a battery- Operated, Hand- Held quick tester designed to easily and quickly determine if a COP is producing a proper spark for the plug. The quick tester works by receiving a signal from the secondary ignition coil. Once the signal is received, The tester determines if the COP is producing the correct amount of voltage and the duration of the arc. If the voltage is correct, The tester beeps and the red LED light flashes; And if the duration of the arc is correct, The green LED will also flash Test Results Red LED Light Consistent, Steady flashing and beeping indicates the COP is producing the correct amount of voltage. No response or an inconsistent response indicates the COP is NOT producing the correct amount of voltage. This may be caused by one of the following: Fouled spark plug, Or incorrect gap Damaged/ Corroded wires or connectors Faulty coil or PCM Green LED light Consistent and steady flashing indicates the duration of the arc is correct. No response or an inconsistent response indicates the duration of the arc is NOT correct. This may be caused by one of the following: 1. Shorted windings inside the coil 2. Resistance or bad connections in the 3. Primary / Secondary connections 4. Faulty coil

My skype: oasdanny my msn: oasdanny@hotmail my email:danny@obdautoscan.com Welcome to OBD AUTOSCAN Technology Co. , Ltd. OBD autoscan , Founded in 2002 , Is one of the main manufacturers of auto diagnostic tools, Such as Star 2000 Diagnostic System, BMW Tester GT1, MB Star Tool, , Honda HIM, GNA ...[Read More]

Company Profile:

• Main Product:

  Auto Accessories; Auto Maintenance; Auto Electrics

• Business Type:

  Manufacturer

Factory Profile:

• Size of Factory In Square Meters:

  1000

• Years of OEM Experiences:

  8

Research & Development:

• Capability for Synchronized Development:

  Develop according to drawing or samples provided by clients?

  Develop 3-D model and prototype according to client's needs?

• Lead Time for New Product Development:

  Within 3-5days

• Tooling Design:

  Design Internally

• Source of Tooling:

  Made Internally

• Software/Profile:

  Others