Quick Details

• Height:

  of main shaft center : 125mm

• Place of Origin:

  Beifang China

• OE Experience:

  No

Product Name:Diesel Fuel Injection Pump Test Stand

Diesel Fuel Injection Pump Test Stand

Application

Bosch,Kamaz ,Toyota,Benz

Product Description:

OEM No/Model: 12PSB-BFB
The frequency conversion and speed change injection pump, Which is made in North Experimental Equipment Factory, Has three main system, That is 12PSB- BFA, 12PSB- BFB, 12PSB- BFC, And there are more than twenty kinds. The basic type 12PSB- BFC has the following characteristic: 1. Changing frequency changing rotation speed continuously; 2. Low fall of rotational speed and high output torque; 3. Ten rotation presetting; 4. Digit- Display rotation speed, Count, Temperature; 5. Fueltemperature autocontrol; 6. The function of over voltage , Heat and overload protecting. Main functions Of 12PSB- BFC type test benches 1. Testing and maintenance go for I, IW, II, III, M, MW, A, AW, B, BW, Z, ZW, P, PW, H, VE etc. Series injection pump. 2. Measure of injection supply volume and uniformity of fuel injection pump. 3. Checking of injection initial point and interval angle of fuel injection pump. 4. Testing and adjusting of the mechanical governors. 5. Testing and adjusting of the vacuum governor. 6. Testing of electromagnetic- Valve of attachment for fuel injection pump. 7. Checking of sealing state of injection pump. 8. Measure of inside pressure of VE tepy pump. 9. Measure of back flow of VE tepy pump. 10. Testing and adjusting of supercharge compensator. Main technical parameters Of 12PSB- BFC type test benches 1. Type : 12PSB- BFC 2. Power : 7. 5 kW 3. Input power suppy : 380V/ 50HZ(or on request) 4. Rotating speed range : 0~3000rpm 5. Cylinder numbers tested : 12- Cylinder 6. Height of main shaft center : 125mm 7. Table height above the floor : 970mm 8. Type of standard injector : Z12J1 9. Opening pressure : 17. 5±0. 2 MPa 10. Computer configuration : Industrial embended systems 11. Type of display : LED 12. Fuel tank capacity : 60 L 13. Rotating speed preset numbers : 10 14. Fuel measured counter : 0~1000 St 15. Graduated cylinder capacity : 45 ml 16. Measure of back Flow of VE type Pump : 500 ml 17. Fuel supply low pressure : 0~0. 4 MPa 18. Fuel supply high pressure : 0~4 MPa 19. Fuel supply flow : ≧10 L/ Min 20. Fuel temperature controlled : 40±2 ℃ 21. Fuel tank heater : 1kW/ 220VAC 22. Fuel cooler : Cooling tube and fan(13m3/ Min) 23. Directive power supply : 12/ 24V (2A, Shor enable) 24. Air negative pressure scope : - 0. 1~0 Mpa 25. Air positive pressure scope 0~0. 16Mpa 26. Basic size (L X W X H) : 1900 mm X710 mm X1700mm 27. Packing size (L X W X H) : 2100 mm X800 mm X1800mm 28. Net weight : 900 kg 29. Gross weight 1200 kg

Taian China North Experimental Equipment Factory is appointed by the country as the professional manufacturer for producing the oil injection pump test bench. It gets the technique support from Tianjin university, Tianjin University of technology, Shandong University of science and technology. ...[Read More]

Company Profile:

• Main Product:

  Diesel Fuel Injection Pump Test Stand

• Business Type:

  Manufacturer