OEM No/Model: HWA-G18
DEFINITION
Four-wheel aligner is used to test alignment parameters of vehicle wheels, components of suspension system and components of steering system. By comparing the measured parameters with designed parameters of vehicle manufacturer, it guides technicians to make relevant adjustment to wheel alignment parameters to achieve ideal driving performance, to guarantee the stability and safety of driving and ease of steering and to reduce the side tyre wear and gas consumption.
PURPOSE OF WHEEL ALIGNMENT
The purpose of wheel alignment is to adjust the suspension system and steering system to its correct position. After wheel alignment, the vehicle should achieve the following performances: Ease of steering and stable driving. While driving straight-ahead, the wheel does not run deviated. The steering wheel is on-center naturally.
The steering wheel returns to its original position automatically after turning.
Reduction of driving resistance and abnormal wear of tyre and chassis components. Enhancement of driving sense of comfort and reduction of oil consumption.
DEFINITION OF RELEVANT 4 WHEEL ALIGNMENT ANGLES
4-wheel alignment angles are present in the relative angles between suspension systems and every active component. Correct wheel alignment angles are the guarantee of driving stability and tyre wear reduction.
The angles mainly consist of camber, toe-in, caster, steering axle inclination and set-back, etc.
PRODUCT CONFIGURATION
The wheel aligner is consisted of main cabinet, computer, sensors, wheel clamps, turntables, steering holder and pedal depressor, etc..
TECHNICAL PARAMETERS
Temperature: -20+70
Relative Humidity: less than 90%
Power Supply: AC220/110 V±10%, 50 /60Hz
Ambient Air Pressure: 70kPa106kPa
Re-chargeable Battery Specification: 7.2V/3000mAH, Ni MH
Power Consumption of Sensors: = 5W
Power Consumption of Machine: =300W
Technical index:
Measuring Items | Precision | Measuring Range | |
Toe | ±1' | ±24° | |
Camber | ±1' | ±10° | |
Front Wheel |
Caster | ±2' | ±20° |
Steering Axle Inclination | ±2' | ±20° | |
Toe | ±1' | ±24° | |
Camber | ±1' | ±10° | |
Rear Wheel |
Set-Back | ±1' | ±10° |
Thrust-Angle | ±1' | ±10° | |
Set-Back | ±1' | ±10° |
Related Product Tags:
collision repair system , grease gun , grease gun accessory , cordless grease gun , grease injector , Grinder , pressure washer , electric high pressure washer , High Pressure Washer , Inflator Machine , Oil Extractor , parking barrier , Plasma Spraying Equipment , Gasoline Pressure Washer , car pressure washer , retreading machine , tyre retreading machine , spray booth filter