Quick Details

• Place of Origin:

  China

• Max. Production Capacity:

  196sets/month

• OE Experience:

  No

Product Name:Car Spray Booth In High Quality

Car Spray Booth In High Quality

Application

surface painting

Product Description:

OEM No/Model: EZ-YB100R

Outside Dimension (mm)	7000 * 5400 * 3250(L*W*H)		Inside Dimension(mm)	6900 * 3900 * 2600(L*W*H)
Front Door(mm)	2800*2500(W*H)		Service door (mm)	1800*650(W*H)
Total Power	15KW
Cabin system	Wall panel	50mm rock-wool panel, double face steel sheet thickness: 0.5mm
	Ceiling panel	Galvanized steel sheet.
	Basement	300mm depth, patented circumferential diamond plate design, middle with grids.
	Ramp	Two 2000*900mm ramps
	Glass	6mm safety tempered glass
	Windows	Square glass Windows
Air Make-up System	Air Inlet fan system	2 * 4 kw double-intake belt centrifugal fan, air capacity for each fan: 14500m3/h.
	Exhausted fan system	1 * 5.5 kw double-intake belt centrifugal fan, air capacity 18000m3/h.
	Air Flowing speed	0.45 m/s in empty booth, 0.35 m/s when painting.
	Exhausted ducting	4 meters air duct, one anti-bird mesh
Purification System	Pre-filter	G3 grade, Air Inlet filter
	Ceiling filter	EU5 / F5
	Floor filter	Green fiber glass filter / G3 grade
	Exhausted fan Filters	Fiber glass filter.
Heating System	Heat Exchanger	SUS304 material, argon arc welding.
	Heating burner:	Riello G20 diesel oil burner(gas burner for option)
	Heating productivity	200000Kcal/h
	Chimney ducting	3 meters stainless ducting and one chimney elbow
	Max heating temperature Heating time	80 degree centigrade 4-6min(20-60 degree centigrade)
	fuel consumption	5-6L /vehicle
Lighting System	Ceiling lights	8 Units, each 4 x 36W Philips lamps, Total 1152 W
	Side lights	8 Units, each 4 x 20W Philips lamps, Total 800 W
	Illumination	1200LUX
Controlling system	Switched control panel	Spraying & baking switch, lighting switch, emergency stop, breakdown alarm, failure alarm

Products Description

This automatic paint spraying/baking booth is used for air purification during auto paint coating operation and drying operation after painting spray. Paint spraying and drying are performed in the same booth. This paint spraying/baking booth is typical of paint spraying and baking functions, provided with automatic thermostat paint spraying, ventilation, air purification, paint mist treatment, and winter hot-air supply functions during paint spraying, and automatic heating, thermostat timing, and timed shutdown function during paint baking. The equipment is reliable in running, simple for operation, and easy for maintenance.

Equipment Constituents

The equipment of this paint spraying/baking booth is composed of booth structure system, illumination System, air supply system, circulation system, air purification system, paint mist treatment system, pressure control devices, and electrical control system, etc.


Spraying Booth Benefits
1. The device through the action of the wind, water, gas mixture enhanced through the diversion gate, retaining plate, collecting tank, etc., to achieve water and gas separation, thereby overcoming the paint Fog clogging pumps and water systems, causing water system is not working properly shortcomings. As a result of the system without pump water saving devices, saving investment and reducing the footprint.
2. The device is in use, the mist through the water curtain, curtain and roll mixing water and gas passage, multiple classification purification efficiency improves the purification process.
3. Due to the mist and water collecting channel disposed between the diversion gate, both in the collection tank with pressure chamber between the retaining plate also has a diversion gate, to prevent the passage of water vapor mist directly from the collection tank and equalizing chamber is discharged, the purification efficiency improves.
4. Due to the water vapor mixing chamber provided with at least a pan of water board, so that water vapor mist air mixing chamber contains sufficient soluble in water, improve the purification efficiency.
5. Because of the water by adding a mist cleaning agents, paint mist undermine adhesion, cohesion so loose paint mist settling on the bottom for easy cleaning.
6. As in the collection tank with access doors for easy maintenance workers.


Captain Spray Booth(Qingdao Hua Yushun Commercial Co., Ltd)
Is a professional leading factory in China, who is specializing in manufacture kinds of paint spray room system. And also offering full garage equipments, such as

Car care equipment.

Car spray&baking room system

Bus spray&baking room system

Furnitue spray&baking room system

Industrial painting&baking room system

High temperature baking room system

Customized spray&bake booth and Offer car spray baking booth accossories


Services We Supply

Customized service

More Than 90% Of Our Spraying Booth Is Customized.

1. We can design the machines according your requirements. At the same time, our engineers will give you our professional suggestions.

2. We can give you free technical support and consultation such as design your factory, make the factory layout drawing and so on.

After-sales service

1. Our fast and professional after service engineer team can go to your factory and install the machine, give you the operating guidance, and train your employees until they can operate the machine well.

2. We often ask feedback and offer help to our customer whose machine have been used in their factory for some time.

3. We provide 2 years warranty.


Captain Advantages

*The same price higher quality, the same quality lower price! ! !
*2 years quality warranty! ! !
*Fast and stable supply capability! ! !
*Personalized design to meet customer various needs! ! !


Competitive Price and High Quality Spraying Booth with Perfect Service Is From Here.

Qingdao Hua Yushun(Captain Auto Equipment Co., Ltd. )is a professional manufacturer and service provider and has specialized in automobile spray booths, industrial coating equipment, automobile maintenance equipment and all associated products for more than 14 years. With a professional R&D team ...[Read More]

Company Profile:

• Main Product:

  Auto Repair Tool

• Business Type:

  Manufacturer

• Current Export Market:

  North America, South America, Western Europe, Eastern Europe, Eastern Asia, Southeast Asia, Mid East, Africa, Oceania

• Total Annual Sales:

  USD 2,000,001 - 5,000,000

Factory Profile:

• Number of Employees:

  51 - 100 People

• Shift:

  1

• Size of Factory In Square Meters:

  6600

• Years of OEM Experiences:

  3

• Certification:

  CE, CE

Research & Development:

• Capability for Synchronized Development:

  Develop according to drawing or samples provided by clients?Yes

  Develop 3-D model and prototype according to client's needs?Yes

• Lead Time for New Product Development:

  7 days

• Tooling Design:

  Design Internally

• Source of Tooling:

  Outsourcing

• Software/Profile:

  AUTOCAD, Autodesk Inventor, Others