Specifications:
|
|
Inside dimension |
18000×5000×5000mm(L×W×H) |
Outside dimension |
18144×6896×5600mm(L×W×H) |
Wall panel |
Profiled bar beams in the roof to strengthen the room body; wall panel thickness:70mm, m, tongue and groove structure, with . EPS insulation inside, colour: white. |
Doors |
Main door: Folding door, 4 folds, 4000×4500mm(W×H), with galvanized steel frame, with polystyrene(EPS) inside, color: blue Escape door : 2 units, 800x2000mm(W×H) /pc, colour: white. |
Basement |
Without basement, 2 rows of pits in the ground for exhaust air, dimension of each pit is 16100×760mm(L×W), with galvanized grilles made by twisted steel and flat bar above. |
Intake air system |
6×5.5KW double-intake centrifugal fans for intake air, model YDW4.5S, total air capacity: 93000m3/h |
Exhaust air system |
3×11KW double-intake centrifugal fans for exhaust air, with motor outside, belt-drive, model TAE-630H, Total air capacity: 84000m3/h. |
Damper actuates |
Pneumatic damper actuates from spraying to baking cycle, manual dampers for exhaust air |
Heating system |
3 units RIELLO RG5S diesel burners, stainless steel heat exchanger, Max. heating productivity: 780000 Kcal/h, Max.work temperature: 80 |
Filter system |
Pre-filter, ceiling filter, exhaust fibreglass filter, activated carbon filter. |
Filtering area |
75M2 |
Lighting system |
Ceiling Lights: 24Units×4Pcs=96Pcs×36W, Side Lights: 28Units×4Pcs=112Pcs×36W, with electronic ballasts, up and down interleaving installation. |
Control system |
Spraying, heat spraying, baking, baking, time setting, lighting switch, failure indicator, thermostat, power supply switch, emergency stop,ampere meter, voltmeter, hours meter, temperature limit controller, pressure gauge. Exhaust reduction voltage motor start |
Total power |
75.5KW |
Related Product Tags:
big spray booth , car spray booth , spray booth , water spray booth , paint spray booth