VANE FOR ENGINE OIL PUMP
1.Material: M2, AISI 1074, 100Cr6;
2.Hardness: HRC 60°~65°, HV1 750+140;
3.Precision: 0.003~0.005mm or custom-made is acceptable;
4.Surface Roughness: Ra<0.2
Thickness | Width | Length | Radius |
1.980 | 10.800 | 11.900 | +R4*2 |
1.980 | 10.600 | 25.000 | +R4*2 |
2.000 | 11.900 | 18.300 | +R3.2*2 |