1.high quality and good price
2.sample available
4.18 months warranty
| 0906 BALLAST SPECIFICATIONS | |
| General spec. | |
| 1.Operation temperature | -40 to +105 |
| 2.Steady state light output | >4500 lumens(for 4300k) typical,bulb type dependent |
| 3.Turn on light output power | >50W after 47 sec |
| 4.Expected ballast life | >3500 hours typical |
| 5.Cooling | Conductively cooled |
| Electrical output | |
| 6.Output waveform | 250 ± 25Hz square wave |
| 7.Steady state output power | 35W± 3W |
| 8.Open circuit protection(lamp is on) | Latch off ballast after 2 sec max |
| 9.Short circuit protection | Latch off ballast after 150msec max |
| 10.Start current | 8A±0.5A initial bulb on . |
| 11.Maximum output power | 80W |
| 12.Steady state output volts | 85V ± 17V |
| 13.starting voltage | 23000V |
| Electrical input | |
| 14.Operation voltage | DC 9V~32V |
| 15.Max. in rush current | <15A (50us) after power on |
| 16.Max. Steady state input power | 45W |
| 17.Input turn off | <8V |
| 18.Input turn on | >9V |
| 19.Normal input current | 4.5A±0.1A(DC 12V) |
| 20.Reverse voltage protection | No damage to ballast with 1V ~ 16V |
Related Product Tags:
hie ballast , Ballast , electronic ballast , electronic ballasts , E1 Ballast , philips electronic ballast , auto ballast , ballasts , thinner ballast , canbus ballast , Bulb And Ballast , Bulb B Ballast , rear beam , longitudinal beam , v beam , sunbeam , single beam , beam carrier