Outdoor Lights 12V Red/Green/Blue Laser all car Fog Light form liwin
Laser all car Fog Light car fog light
1> Convenient traffic car Fog Light
2> Safe driving car Fog Light
3> Fast Shipping car Fog Light
4> Easy to install car Fog Light
5>For the sake of safety of life car Fog Light
Laser injection Angle:
the Angle of 45 degrees to recommend, 30 degrees Angle for alert, alert Angle is why? Because when injection Angle is less than 30 degrees, Angle is too small, laser near after direct owner's eyes, and will affect the driving after the owners, in the traffic regulations is not allowed
When the injection Angle of 45 degrees to 30 degrees, shoot the laser beam on the ground the distance from the car is about 3 ~ 5 meters, the width of the length of the laser beam is about a car.
PRODUCT ADVANTAGE
1). Using Highlighting the LED chip set, bright and durable;
2). Environment friendly, no pollution, no radio interference;
3). Applying advanced technology, light emitting stably and purely;
4). Alloy housing materials, shockproof, corrosion resisting;
5). Available for the cars in all car;
6). Upside and center of rear license plate, easy to install.
7). Keep a safe anytime and anywhere, all by yourself.
Model no | CLF-03 |
Type | Laser all car Fog Light |
Working voltage | 12v-24v |
Laser wavelength | 6500mm (red, green, blue) |
Laser power | 200mw |
Laser safety class | Class III B |
Working temperature | -20C~70C |
3M Tape bearing temperature | -40C~120C |
Maximum adjustable angle | Up/down ±90C |
Warranty | 12 months |
Waterproof grade | IPX4 |
Lifespan | 30000 H |
Light pipe | Using mitsubishi laser tube, the standard 90 degree Angle |
Installation plate | Upside and center of rear license plate |
Connection | Parallel to number plate light,rear foglight,stoplight,warning light |
Car make | ALL cars |
Failure |
<0.1% |
PRODUCT SHOW |
Advantages
PRODUCT ADVANTAGE |
ADVANTAGE
> On rainy,foggy,sandstorm days,it works as a warining sign to effectively avoid traffic accidents that caused by driving too close.It can also be used as vehicle position warning and steering indicator at night. For new drivers,it will be helpful when you back your car into garage.
OTHER PRODUCT |
INSTALLATION CASE |
Rip the two-sided tape then stick laser fog light to the upside,center of the rear license plate.Connect the wire and turn it on.Adjust the angle of the beam,then tighten the screw.
PRODUCT APPLICATION |
Company Information
ABOUT LIWIN |
CUSTOMER PHOTO |
OUR CERTIFICATION |
Packaging & Shipping
TRANSACTION PROCESS & PACKAGING |
IT IS SO EASY To START A INTERNATIONAL BUSINESS WITH US ! PRODUCT PACKAGING Our Services
OUR SERVICE |
HOW TO CONTACT US?
Tel | 86 15920871181 |
Fax | 86 20 66656962 |
liwinchina @liwin-china.com | |
Web | |
Msn | Kirby.ke @hotmail.com |
Skype | davi.ke |
Add |
612, Floor 6, Guan'er Yongtai Bldg., No. 810, Congyun Road, Yongping Street, Baiyun District, Guangzhou, Guangdong, China (Mainland) |
F A Q |
INTRO:
1) How long have you been in business?
09 began to produce this type of lamp
2) What are your shipping terms? (FOB, CIF, DDP?)
FOB,CIF
3) What is your OEM packaging inside and outside? What is in every single box?
Neutral packing, foam inside box+ outside box+ Carton
4) Lead time from order placed/payment received to port (China)
Base on the quantity,small order: 1-3days, bulk order: 7-15days
QUALITY:
5) Where do you source your lw LEDs from?
Intact imported from United States.
6) Your quality guidelines? Your defect rate?
Our repair rate has been control in 1/1000
7) Warranty? How long?
We have, 6-12moths
8) Manufacturer capacity?
250 million yuan
9) Type of testing? What testing machines?
Waterproof test , burn-in test, Antistatic, Integrating sphere 1, carving machine, 2 salt spray
test machine,1 shock tester,1 EMCRF SHIELD ROOM, Darkroom
10) Waterproof grade ?
IPX4
11) What is your light Working voltage ?
We have 12v-24v
12) Aluminum or copper circuit board?
Aluminum substrate
13) Aluminum or nylon housing mold?
Aluminium alloy extrusion profiles
14) Features: Lens type? Steel type? Paint type? Heat sink?
Lens type: PC or tempered glass,Heat sink: heat shrink tubing
15) Optical efficiency? Power consumption?
That must have the consumption during the burn-in test, but for the concrete data, we do not
have the calculation.
16) What sets you apart from other factories?s
We started production of this type of 09 lamp manufacturers, an earlier we are manufacturer
of this type lamp, technical experience. We do OEM for Europe and the United States 70
brands, our quality received the affirmation of the industry!
Related Product Tags:
focus fog lamp , fog lamp , fog lamp assembly , fog lamp assy , fog lamp case , car fog lamp light , fog lamp of camry , fog lamp rim , fog lamp set , fog lamp wire , fog lamps , golf fog lamp , fabia fog lamp , dacia fog lamp , kinrun front fog lamp , kinland fog lamp , globe fog lamp , front fog lamp