custom logos with white/red/blue/green/orange/ light colors for car logo light for led door logo projector
Product Description
| power | 3watts original led C*R*E*E/O*S*R*A*M |
| Color Temperature | 6500 to 7000k |
| Operating Voltage | DC9v-16v |
| Luminous Flux | 210 to 260lm |
| Viewing Angle | 125 to 165 degrees |
| Operating Temperature | -10 to +135鈩? |
| Light Life | more than 90,000 hours |
| Waterproof Grade | IP67 |
| Shokproof Grade | Best |
| Accessories | hole saw φ24mm |
| Size | front face.φ28mm.barrel.φ22mm.total length.φ68mm |
Pictures


Packaging & Shipping
Package Include:
2 x door step Projection logo LED light + 1 Hole drille+VIP box

Shipping details:
| Shipment Ways | By Express(DHL/FEDEX/UPS/TNT, Etc); By Sea; By Air, and so on. |
| Delivery Time | By DHL(about 3 working days); By FEDEX/UPS/TNT(about 7-9 working days); By Sea(about 1 month); By Air(about 10 working days) |
Our Services

Company Information


1. How to install:
Installation instructions:
Step one: Removing the Door Panel
* make sure you are using adequete tools
* snap off the panel located on the inside of the door
* Gently disconnect any wiring that may be attached
Step two: Using the hole Saw
* Remove the hole saw tool from it's packaging
* Drill out correct size hole from projector light
* Ensure even contact between surface and drill
Step three: Wiring to power
* Connect the red and black wires to power and ground
* Use proper safety when handling electricity
* Snap the door panel back on and you're good to go

2. What's your other main products:



-------------------------------------------------------------------------------------------------------------
