Quick Details

• OE Experience:

  No

Product Name:Led Indoor Grow Lighting,Led Hydroponics Lighting

Led Indoor Grow Lighting,Led Hydroponics Lighting

Application

cidly

Product Description:

I. High quality 3W LED+700mAcurrent=The top performance700 mA is the best drive current for 3W LEDs,runing LEDs with possibly high current can take full advantage of LEDs, making your initial investment in LED devices to be well worth it.However, LEDs and LED drivers should be of superior quality as so to undertake the high electric current, besides the entire equipment should be good enough in heat dissipating to bear all the heat emitted by 3w leds.Selects the finest LEDs and drivers to ensure the stable performance as well as the long life span of the fixtures,our three-year warranty policy proves our confidence in products.II. Modularity designModularity design, each part interconnect by the male female plug directly, very easy for repairment and maintenance, only few steps to assemble up the whole fixture.III. RTPM intelligent control systemRemote,Dimming,Timing and Temperature controlRTPM is a multifunction intelligent system, including remote, dimming, timing, custom temperature control and mult-unit chaining function. In order to meet the growth demand of all kinds plants, the users can choose various different lighting effect scheme. 1Remote-controlled, dimming and timingThere are three controllable circuits in the light, the brightness value is 0%-100%, in order to add and reduce the adjustable brightness , 1% or 10% is available, also,  1% is allowed to adjust the brightness in the single circuit. Four time bucket can be set on brightness in each circuit. In the right system time setting circumatances, when the time reach timing time bucket, the hole light will turn into the timing preinstall brightness automatic.24 hours continuous cycle.Please see the remote operation instruction manual )2Temperature control and protection   When the heat sink temperature over 65, the intelligent temperature control will cut off the power supply system automatic. The system will outo star when the temperature cooling to 50°.3Data memory    The brightness and timing setting will auto-save after setting 45 seconds, the lamp will enter the setting brightness condition last time when it electrify and get to work next time. The system time will keep the clock continuous operation about 3 months after the lamp completely without electricity, the built-in superbattery will be full charged within 20 seconds. Also, it without needing battery replacements.
SpecificationName:50W LED Grow LightActual power:45~55WModel:CDL-G-PT50W        LED Qty:27pcs*3WInput voltage:AC100~240VLED color:Red(630nm)/Blue(460nm)Output voltage:DC55~70V       Lifespan:50,000 HoursInput current:670~700mABrightness value:0%~100%Low voltage impulse:400usPF:0.9Control system:RTPMWorking frequency:50~60HzCircuits:1Working environment:-20~4045%~95%RHProduct size:175*242*105mmN.W.:1.6kgInner carton size:280*250*140mmG.W.(Inner carton ):2.1kgOuter carton size:570*270*310mm/4pcsG.W.(Outer carton ):8.94kgStandard configuration:LED Light x1,Remote control x1,Power line x1,Chaining x2,Remote control operating instruction x1Remarks:The above parameter is based on Red:Blue=8:1, for reference onlyIllumination and PAR value data sheetHeight(cm)20406080100150200PAR (umol m-2s-l)8282261025736148Illumination(lux)216005820275015921022453260Irradiation Area(m^2)4.68.0411.5813.8516.1821.5623.07(Remarks: the irradiation area is base on PAR value>10 )Introduction:1. Use high quality LED lighting source, the lifespan is up to 50000 hours.2. Replace 3~5 times of the HPSL power, 80% electric energy saving than the tradition HPSL and MHL.3. High lighting effect, 90% of the light will be absorbed by the aquatic plant, but to the traditional HPSL and MHL, the lighting effect is just 8%~10%.    4. Input cooling system, well solve the heat sink problem.  5. The input voltage is AC100V~240Vsuitable for the world standard. Built-in power supply. No need other equipment, just access AC100~240V voltage from the plug, the lamp will be working smoothly, don't need the reflector and ballast either.      6. The lighting area and the height are changeable according to different plants and environments, t

Shanghai Cidly Optoelectronic Technology Co., Ltd was established in 2009 , the factory is located in Shenzhen Special Economic Zone , elegant environment and convenient transportation of water Tian Dingfeng Technology Park , Shiyan , China has developed into one of the largest service providers ...[Read More]

Company Profile:

• Main Product:

  Led Grow Lights

• Business Type:

  Manufacturer

• Current Export Market:

  North America, South America, Western Europe, Eastern Europe, Eastern Asia, Southeast Asia, Mid East, Africa