Advanced features:
1,Voltage:
Our back-up light's ballast voltage range is 6--16V.
Most of the product is 9--16V, but its voltage drop will down to 9V below, so the light can't be lighting sometimes.
2,Power:
Our item's ballast is 18W,±2W.
There are some 15W back-up lights in the market, but actually its ballast is 25W,35W bulb, it will impoves power loss.
3,Starting current
Our bulb is custom made 18W bulb,the starting current 3A just fit for 18W bulb.
The 'starting current' isn't good is the market conditions, it connected with the power,if make the current smaller and bulb can't be lighting,if make the current bigger and will burn the fuses.
SPECIFICATIONS:
1.Working Voltage:6V--16V ;
2.LIgnition Voltage18KV
3.Output power18W±2W@(616V)
4.Working Temperature-40+105
5.Output Voltage:60VAC--120VAC
6.Cold start current:3A@12V;
7.Cold start time:<20 seconds
8.Hot start time:<2 seconds;
9.Open circuit protection:<0.5 second;
10.Sparkling protection:<0.5 second;
11.Short circuit protection:<0.5 second;
12.Overvlotage protection:16V±0.5V
13Undervoltage protection:5V±0.5V
14.Ignition power storage time:±40MS
Related Product Tags:
hie ballast , Ballast , electronic ballast , electronic ballasts , E1 Ballast , philips electronic ballast , auto ballast , ballasts , thinner ballast , canbus ballast , Bulb And Ballast , Bulb B Ballast , rear beam , longitudinal beam , v beam , sunbeam , single beam , beam carrier