hid light ballast,xenon light ballast,hdi lamp ballast: Normal ballast parameter: Input Voltage:9-16V Normal Voltage:13.5V Normal Current:3.2A Max. Input Current:9A Operating Temperature:-40 to +105C Output Power:35W,50W,55W Output AC Frequency:250Hz Start Time:45s Start Voltage:20-25Kv Performance: Waterproof:Accord with DIN 40050 Standard Dustproof:Accord with SAE J575 Standard Shockproof:Accord with DIN 40046 Standard Advantage of Rambo ballast: Cold start current6.2A.Original fuse in car is 7.5A.But most of ballast in market are higher than this owing to their factory cant control this.Its a hidden danger to original car circuit. Hot start current3.6A.Very stable electric current keep you safe when you are switching between high light and low light in driving.But some suppliers are up to 10A and not stable enough. Hot start power35W.Stable hot start power make no damage to xenon bulb.This prolongs xenon bulbs lifetime 1.5 to 2 times.However most of other suppliers are high to 75W. Cold start power56W.No damage to burner and xenon arc.However many others are up to 105W. Output voltage:60V/165V.After worked for 2000 to 3000 hours later,Xenon bulb working voltage reach to 115V to 150V.At that time many ballasts can not provide that high voltage.So xenon bulb can be lighted up again.But our ballast can output more 10 to 15V.This meands xenon bulb can work more 600 to 1000 hours. Working efficiency:87%.Very close to Hella,Germany(89%).High efficiency means ballast use most of power for xenon bulbs work and release less heat.Release less heat means ballast components can work in a good condition.This is the key why we can control our ballast in very low defective rate.
Related Product Tags:
hie ballast , Ballast , electronic ballast , electronic ballasts , E1 Ballast , philips electronic ballast , auto ballast , ballasts , thinner ballast , canbus ballast , Bulb And Ballast , Bulb B Ballast , rear beam , longitudinal beam , v beam , sunbeam , single beam , beam carrier