BULBS:H1,H3,H3C,H4-1,H4-2,H7,H7R,H8,H9,H10,H11,H13-1,H13-2,H13-3(SWING),9004-1,9004-2,9004-3(SWING),9005,9006,9007-1,9007-2,9007-2B,9007-3(SWING),880/881,D2R-S-C,D4S-S-C,D4S,H4/HL,H4/HL-C...
BALLASTS:08,09A(WHITE BLACK),09B(DIAMOND),09C(BRONZE),SLIM SILVER,SLIM RED...
Ballast imported components:IR mos(USA), Ruby Capacitor(Japan),Switch discharge tube(Korea), CPU(Pillips), TKD transformer(Japan) and so on
HID Process of testing: Open circuit protection,Short circuit protection,Short voltage protection,Over voltage protection, Polarity protection,
Flash impact test,Warm start-up test,
Shockproof/waterproof/dustproof test,
EMC anti-jamming test, High/low temperature condition,
Operating test(40105)
defect rate: 0.05% to 3%
Warranty: 14 months.
Electrical Input Parameter:Steady State Input Voltage:9-16V,
Max in rush Current:15A@50ms,8A at 2secs,Decreasing to steady state within 30 secs, Max steady state input power:45W(9-16V),
Input turn on:9V and above,Input turn off:below 8V,
Reverse Voltage Protection:No Damage to ballast with -40V
susceptibility:S95/54/EC,Conducted EMI Emission:S95/54/EC
Efficiency:Over 90% during steady status
Related Product Tags:
hie ballast , Ballast , electronic ballast , electronic ballasts , E1 Ballast , philips electronic ballast , auto ballast , ballasts , thinner ballast , canbus ballast , Bulb And Ballast , Bulb B Ballast , rear beam , longitudinal beam , v beam , sunbeam , single beam , beam carrier