Features: BANBO HIDconversion kit- Neptune-s 1)Rapid startup; 2)High brightness, can reach 3600 lumens; 3)Stable brightness, never weaken down; 4)Stable performance even working in high temperature. 5)Slimmer design comparing with Neptune.Parameters: 1) Input voltage rage: DC 9~16V 2) Rated voltage: 13.5V 3) Max. start voltage: 23kV 4) Input current: 3.1A+/- 5% 5) Output power: 35W+/-2W 6) Luminosity: 3,600 lumens 7) Working temperature: -40 ~ +105°C 8) Color temperature: 4,300K - 12,000K or above 9) Life-span: 3,000 hours 10) Startup time: can reach 20% of the standard brightness within 1 second; can reach 80% of the standard brightness within 4 seconds ; 11) Auto cut-off: once there is a short circuit or open circuit, the ballast will stop working automatically ; 12) Protection voltage: when the voltage exceed 19V, the ballast will stop working automatically, and make the output power below 45W, to protect the ballast and bulb from damage. When the voltage is 8V, the ballast still can work normally, but when the voltage is below 7V, the ballast will stop working to protect the ballast from damage ; 13) Reverse polarity protection: the ballast will stop working automatically when a reverse polarity happens ; 14) Radiation: Relative value: less than -70dB Absolute value: less than 20mW for standard wireless interference Relative value: less than -90dB Absolute value: less than 5mW for our product
Related Product Tags:
hie ballast , Ballast , electronic ballast , electronic ballasts , E1 Ballast , philips electronic ballast , auto ballast , ballasts , thinner ballast , canbus ballast , Bulb And Ballast , Bulb B Ballast , rear beam , longitudinal beam , v beam , sunbeam , single beam , beam carrier