Global Auto Parts & Accessories Marketplace
Home » Product Directory » Car Accessories » Interior Trimming Accessories » Other Parts »

Pressure Control Valve Components-Metering Valve On Fuel Pump

    • Application: BAW, BENZ, Chevrolet
    • Market Type:After Market 
    • FOB Price: USD 3
    • Payment Terms: L/C, T/T, D/D
    • Samples: Charge
    • Minimum Order: 1PCS

Quick Details

  • Samples:

    Charge

  • Sample Price:

    3

  • Delivery Time:

    7-10 Days

  • Packing:

    Neutral Packing

  • Delivery Port:

    Xiamen Port

  • Max. Production Capacity:

    10000/Pcs

  • Export Ratio:

    61% - 70%

  • OE Experience:

    No

Product Name:Pressure Control Valve Components-Metering Valve On Fuel Pump

Pressure Control Valve Components-Metering Valve On Fuel Pump

Application

BAW, BENZ, Chevrolet

Product Description:

 

How Diesel engine fuel injector nozzle work?
 
The injector nozzle is connected to the injector by the lower holder. Some of the injector is connected to the combustion chamber from the engine block as we mentioned earlier. The fuel from the fuel pump through the injector passes through the injector and reaches the injector nozzle.
China-Lutong as China's leading diesel injection system specialists with over 20 years experience, we hope to meet you in our booth and have a meeting. This largest international automotive aftermarket trade show in the Middle East, Automechanika Dubai acts as the central trading link for markets that are difficult to reach connecting the wider Middle East, Africa, Asia and key CIS countries. Please kindly take a note of our stand place in the fair:
 
 AFD-Mandy

Our Advantage:
1.High quality products
2.Strong Suppy Capacity.
3.Capacious warehousing
4.competitive factory price
5.Complete after-sale service system

 

How Diesel engine fuel injector nozzle work?

 

The injector nozzle is connected to the injector by the lower holder. Some of the injector is connected to the combustion chamber from the engine block as we mentioned earlier. The fuel from the fuel pump through the injector passes through the injector and reaches the injector nozzle.

China-Lutong as China's leading diesel injection system specialists with over 20 years experience, we hope to meet you in our booth and have a meeting. This largest international automotive aftermarket trade show in the Middle East, Automechanika Dubai acts as the central trading link for markets that are difficult to reach connecting the wider Middle East, Africa, Asia and key CIS countries. Please kindly take a note of our stand place in the fair:

 

 

Our Diesel Fuel Injection Spare Parts application Engines include SCANIA, VOLVO, MAN, MERCEDES BENZ, DAF, FORD, CUMMINS, IVECO, TOYOTA, ISUZU, MITSUBISHI, NISSAN, DONGFENG FAW, FOTON, JAC, CUMMINS, BUS TRUCK PICK UP PARTS, , FIAT, MASSEY FERGUSON, AND AGRICULTURE CONSTRUCTION MACHINE DIESEL and so on...


The merits of the common rail fuel injection system architecture have been recognized since the development of the diesel engine.Lower fuel pump peak torque requirements. As high speed direct injection (HSDI) engines developed, more of the energy to mix the air with fuel came from the fuel spray momentum as opposed to the swirl mechanisms employed in older, IDI combustion systems. Only high pressure fuel injection systems were able to provide the mixing energy and good spray preparation needed for low PM and HC emissions. To generate the energy required to inject the fuel in approximately 1 millisecond, the conventional distributor pump would have to provide nearly 1 kW of hydraulic power in four 1 ms bursts per pump revolution, thus placing considerable strain on the drive shaft. One of the reasons behind the trend toward common rail systems was to minimize the maximum pump torque requirement. While the power and average torque requirements of the common rail pump were similar, high pressure fuel delivery is to an accumulator and thus the peak flow rate (and peak torque required to drive the pump) does not have to coincide with the injection event as is the case with the distributor pump. Pump discharge flow can be spread out over a longer portion of the engine cycle to keep pump torque demand more even.
 
Improved noise quality. DI engines are characterized by higher peak combustion pressures and, thus, by higher noise than IDI engines. It was found that improved noise and low emissions were best achieved by introducing pilot injection(s). This was most easily realized in the common rail system, which was capable of stable deliveries of small pilot fuel quantities over the entire load/speed range of the engine. 

Send your message to this supplier:

logo Mr. Hua Chen
Enter between 20 to 3,000 characters, English only.

Supplier Details

China Lutong Parts Plant

Gold Member
Market Type: After Market 
Business Type: Manufacturer
Main Product: Rotor Head, Nozzle, Plunger and Other Diesel Engine Fuel Injection System Accessories.

You May Like:

Suction Control Valve Nissan Navara D22-Bosch Dies ... Application: AK, ALPINA, Buga ...
OEM No: FOOR000 ...
Mechanical Diesel Fuel Injection Pump-Stanadyne Fu ... Application: AK, ALPINA, Buga ...
OEM No: FOOR000 ...
John Deere 2 Cylinder Injection Pump-Bosch Electro ... Application: AK, ALPINA, Buga ...
OEM No: FOOR000 ...
NEW Alternator Voltage RegulatorAcura VR-H2005-18A ... Application: FOR
OEM No: VR-H200 ...
CHEVROLET N300-N200 INTER LAT HANDLE FOR OPEN 2452 ... Application: Chevrolet
OEM No: 2452496 ...
Wind Fairing Using Car Roof Box Application: universal car
Guides, Timing Chain For Mercedes Benz 1190520916 Application: Mercedes Benz
OEM No: 1190052 ...
LEFT FRONT DOOR GLASS LIFTER SWITCH B3746120 Application: LIFAN PARTS
OEM No: B374612 ...
Car Bike Carrier

Related Product Tags:

inner trim part , inner trim parts
Didn't find what you are looking for?
Please send us Your Search Requirement, or you can Post a Buying Lead,
suppliers may contact you actively.

Send Message