Quick Details

• Size:

  1mm

• Model number:

  INTL-EH087

• Place of Origin:

  China

• Samples:

  Charge

• Export Ratio:

  91% - 100%

• OE Experience:

  No

Product Name:Expansion Valve For Volkswagen VW SAGITAR

Expansion Valve For Volkswagen VW SAGITAR

Application

Volkswagen VW SAGITAR

Product Description:

OEM No/Model: INTL-EH087

Specification:

Model No.: INTL-EH087

Car Model: Volkswagen VW SAGITAR

USED for:

Expansion Valve for Volkswagen VW SAGITAR

The TXV meters the amount of liquid refrigerant that can flow into the evaporator. Located at the evaporator inlet, the TXV is the dividing point between the high and the low pressure sides of the A/C system. As the refrigerant passes through the TXV, the refrigerant pressure is lowered. Due to the pressure differential, the liquid refrigerant will begin to boil at the TXV outlet before entering the evaporator core. This characteristic is observed as a drop in temperature between the TXV inlet tube and the evaporator inlet tube.

Before replacing TXVs, always follow the A/C Performance Diagnostic in the Service Information to verify the valve performance and review the following diagnostic tips.

TXV FAILURE MODES  

A/C Not Operative or Intermittent Possible Causes:

1, Bulb Sensor -

Temperatures on inlet and outlet tubes:

Are the temperatures on both sides (inlet and outlet tubes) of the evaporator thermal expansion valve tube at the expansion device similar? If yes, replace the damaged or faulty thermal expansion valve.

Pressures:

Are both the low side and high side pressures within the specified values? Refer to the appropriate HVAC zone diagnostic. 

2, Incorrect refrigerant charge -

Diagnose and repair potential leak and/or fill A/C system with correct charge.

3, Leaking interfaces (Incorrect fastening at TXV or seal damage) -

Apply correct torque or replace seals if necessary.

4, System contamination -

Is the liquid line extremely cold at the expansion device location and warm beyond the expansion device location? The expansion device is restricted. Inspect for contamination (brown, powdery residue or metal flake) and replace TXV.

Noise Possible Causes:

1, Leaking interfaces (Incorrect fastening at TXV) -

Fill system with correct charge.

2, Incorrect refrigerant charge -

Fill system with correct charge.

3, Non-optimized TXV/evaporator/plumbing -

Verify if noise is being produced by the TXV or other A/C system components.

TIP: Do not replace the TXV until you verify all previous steps and you can eliminate all other failure modes.

International Auto Parts (China) Limited established by three auto air-con factory in 2008. But now, With the development of company, Intl is one of the member of China Automotive Air Conditioning Industry Association and enlarge our business scope to sell all auto air conditioner parts: ...[Read More]

Company Profile:

• Main Product:

  Auto air compressor , auto air condenser ,control valve,Shaft seal,evaporator , fan, Condenser

• Business Type:

  Manufacturer

• Current Export Market:

  North America, South America, Western Europe, Eastern Europe, Southeast Asia, Mid East, Africa, Oceania

• Total Annual Sales:

  USD 5,000,001 - 10,000,000

Factory Profile:

• Number of Employees:

  Less than 50 People

• Shift:

  2

Research & Development:

• Capability for Synchronized Development:

  Develop according to drawing or samples provided by clients?Yes

  Develop 3-D model and prototype according to client's needs?Yes

• Tooling Design:

  Design Internally, Outsourcing or Cooperation

• Source of Tooling:

  Made Internally, Outsourcing