Quick Details

• Length:

  1cm

• Width:

  1cm

• Height:

  1cm

• RPM:

  xrev/min

• Power:

  xkw

• Place of Origin:

  China

• Samples:

  Charge

• Delivery Time:

  Up To Our Clients Demand

• Delivery Port:

  HUANGPU

• Max. Production Capacity:

  6000 Set/Sets Per Week

• Export Ratio:

  91% - 100%

• OE Experience:

  No

Product Name:DENSO 10SA13 95200-M68KA1 95200M68KA1 240809A33697 447280-0490 4472800490 AUTO AC COMPRESSOR FOR NISSAN SUZUKI

DENSO 10SA13 95200-M68KA1 95200M68KA1 240809A33697 447280-0490 4472800490 AUTO AC COMPRESSOR FOR NISSAN SUZUKI

Application

NISSAN SUZUKI

Product Description:

OEM No/Model: 95200-M68KA1 95200M68KA1 240809A33697 447280-0490 4472800490

DENSO 10SA13 Nissan Suzuki ac compressor

Specification:

Model number: INTL-XZC720

Car name: Nissan Suzuki

Type: DENSO 10SA13

Pulley: 4PK

Volt: 12V 

Clutch: 120mm 

Special Notes:

OEM# 

95200-M68KA1

95200M68KA1

240809A33697

Denso:

447280-0490

4472800490

Basic Requirements when servicing an A/C system:

1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well

2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.

3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.

4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.

5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.

6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced

International Auto Parts (China) Limited established by three auto air-con factory in 2008. But now, With the development of company, Intl is one of the member of China Automotive Air Conditioning Industry Association and enlarge our business scope to sell all auto air conditioner parts: ...[Read More]

Company Profile:

• Main Product:

  Auto air compressor , auto air condenser ,control valve,Shaft seal,evaporator , fan, Condenser

• Business Type:

  Manufacturer

• Current Export Market:

  North America, South America, Western Europe, Eastern Europe, Southeast Asia, Mid East, Africa, Oceania

• Total Annual Sales:

  USD 5,000,001 - 10,000,000

Factory Profile:

• Number of Employees:

  Less than 50 People

• Shift:

  2

Research & Development:

• Capability for Synchronized Development:

  Develop according to drawing or samples provided by clients?Yes

  Develop 3-D model and prototype according to client's needs?Yes

• Tooling Design:

  Design Internally, Outsourcing or Cooperation

• Source of Tooling:

  Made Internally, Outsourcing