Quick Details

• Place of Origin:

  China

• Samples:

  Charge

• Export Ratio:

  91% - 100%

• OE Experience:

  No

Product Name:Compressor For Audi A8/A6

Compressor For Audi A8/A6

Application

Audi A8/A6

Product Description:

OEM No/Model: 077260803AD ; 077260803AE

 Item No. :Intl-xzc039
 Compressor Type DCW17B  
 OEM No. 077260803AD ; 077260803AE  
 Original No. 506031-0731 ; 506031-0851  
 Vehicle Application Audi A8 2.8 94'>95' ; A6 2.0 16V 95'>96'  
 Pulley Diameter 119mm  
 Grooves 6PK  
 Front Separation 14mm  
 Rear Separation N/A  
 Voltage 12V 

Basic Requirements when servicing an A/C system:

1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well

2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.

3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.

4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.

5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.

6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced

International Auto Parts (China) Limited established by three auto air-con factory in 2008. But now, With the development of company, Intl is one of the member of China Automotive Air Conditioning Industry Association and enlarge our business scope to sell all auto air conditioner parts: ...[Read More]

Company Profile:

• Main Product:

  Auto air compressor , auto air condenser ,control valve,Shaft seal,evaporator , fan, Condenser

• Business Type:

  Manufacturer

• Current Export Market:

  North America, South America, Western Europe, Eastern Europe, Southeast Asia, Mid East, Africa, Oceania

• Total Annual Sales:

  USD 5,000,001 - 10,000,000

Factory Profile:

• Number of Employees:

  Less than 50 People

• Shift:

  2

Research & Development:

• Capability for Synchronized Development:

  Develop according to drawing or samples provided by clients?Yes

  Develop 3-D model and prototype according to client's needs?Yes

• Tooling Design:

  Design Internally, Outsourcing or Cooperation

• Source of Tooling:

  Made Internally, Outsourcing