OEM No/Model: CO 11028C CO 11028Z UAC
10pa15c MITSUBISHI Toyota 1pk COMP
Specification:
Model Number: INTL-0105
Car name: Mitsubishi Toyota
Compressor Type: 10PA15C
Grooves: 1PK
Clutch DIA: 133mm
Volt:12v
OEM NUMBER:
CO 11028C
CO 11028Z UAC
Details
Mitsubishi kompressor
10PA15C Toyota compressor
Basic Requirements when servicing an A/C system:
1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well
2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.
3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.
4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.
5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.
6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced
Related Product Tags:
ac compressor , ac compressors , Sd Ac Compressor , Electric AC Compressor , automotive ac compressor , car ac compressor , Automobile AC Compressor , AC Compressor Parts , auto ac compressor , air brake compressor , Automobile Air Compressor , Auto Air Compressor , Atlas Air Compressor , Case Air Compressor , car air compressor , air compressor , air compressor crankshaft , cummins air compressor