Global Auto Parts & Accessories Marketplace
Home » Product Directory » Engine System » Fuel System » Diesel Injector Nozzle »

DIESEL PISTON TD27-LATE,TIN COATED 12010-6T010/12010-6T000

    • Application: all
    • Market Type:After Market 
    • Price: Inquiry For It?
    • Payment Terms: L/C, D/A, T/T, D/P
    • Minimum Order: 400 Pieces

Quick Details

  • Type:

    Diesel Engine

  • No. of Cylinders:

    4 Cylinder

  • Place of Origin:

    Guangdong China (Mainland)

  • Brand Name:

    Strong/Customized

  • Model Number:

    TD27

  • Place of Origin:

    Guangdong China (Mainland)

  • Delivery Time:

    60DAYS

  • Packing:

    STRONG BRAND,CUSTOMIZED PACKING,OEM

  • Delivery Port:

    GUANGZHOU

  • OE Experience:

    No

Product Name:DIESEL PISTON TD27-LATE,TIN COATED 12010-6T010/12010-6T000

DIESEL PISTON TD27-LATE,TIN COATED 12010-6T010/12010-6T000

Application

all

Product Description:

DIESEL PISTON TD27-LATE,TIN COATED 12010-6T010/12010-6T000

OEM:12010-6T010

CYL NO.:4

CYL Diameter:96.00mm

Compression distance:50.3mm

Total length:86.0mm

Piston ring size:2.5+2.0+3.0

Piston Pin:30mm*74mm

 

 

 

Piston Technology

Tin Coating
Tin is coated by electro analysis or heat dipping at thickness between 0.001 and 0.003mm. Tin is characterized as soft and oil-friendly which improves running-in efficiency of piston and liner. This coating is most commonly used.

 

1.jpg

 

 

Graphite Sprayed at Piston Skirt/Graphite Printing
Graphite is characterized as good lubricating, which helps lubricant adhering to coating surface. The coating will reduce friction and scratching. The thickness is between 0.01 and 0.02 mm.

 

2.jpg

 

 

Piston roof anodizing
The piston roof is anodized by electro bath, forming thin layer of Al2O3 , This treatment will improve heat resistance (above 500°C), heat conductivity and anti-corrosion,  it helps prevent piston roof burn-up. The thickness is normally 0.02 to 0.05mm. If the thickness increases by 0.01mm, the heat conductivity will decrease by 25%, the roof temperature when running will be lower from 30 to 50°C. Anodizing technology and processing is normally complicated.

 

3.jpg

 

Piston roof MoS2 Spraying
The function is close to roof anodizing improving heat resistance. The MoS2 is also good at lubrication. (The bigger piston below is piston roof anodizing, the smaller one is MoS2 Spraying)

 

4.jpg

 

 

Phosphate
The phosphate is aimed to improve initial running-in performance,

The phosphate layer is easy to wear off and helpful to improve running-in.

 

 

5.jpg

 

Ceramic Spraying
The treatment performance is similar to anodizing and heat insulation performance is better. The ideal thickness is 0.2 to 0.3mm. When running under high temperature, the ceramic is easy to crack and wear off. It is not commonly used due to high cost

 

6.jpg

 

 

Piston Type

 

Steel-insert piston

 

Steel-insert piston allows more uniform thermal expansion and tight fitting clearance.

 

7.jpg

 

 

ALFIN piston

 

ALFIN is inserted within the ring grooves when casting. ALFIN is made of special austenitic cast iron. It is tightly bonded metallically to piston body and counteracts the wear in the top ring groove. ALFIN pistons are commonly used in diesel engines.

 

 

8.jpg

 

 

Cooling channel piston

 

Cooling channel pistons effectively reduce piston body working and groove land temperature under high temperature working condition.

 

9.jpg

 

 

One piece casting piston

 

Compared to common five-pieces casting, one piece casting technology is better in efficiency and appearance, it also reduces casting flaws.

 

Compares piston

 

The sealing and guiding functions of the piston are separated from one another. The upper part is made of cast iron and the lower part is made of aluminum. The two parts is joined by bolts. The piston can perform with not only maximum strength and heat resistance, but also low wear values and optimum conditions for meeting future emission standards.

 

Forged piston

 

The forged piston allows smaller cross sections and lower piston weight. This kind of piston is installed primarily in sports car engines and heavy-duty fast-running engines.

 

Piston Structure

 

 

 

10.jpg

 

Send your message to this supplier:

logo Mr. Jinquan Xu
Enter between 20 to 3,000 characters, English only.

Supplier Details

Guangzhou Kinfen Engine Valve Factory

Market Type: OE Market 
Business Type: Manufacturer
Main Product: Engine Valves, Stem Size From 3mm To 18mm Intake And Exhaust

You May Like:

HYUNDAI DIESEL PISTON D4AE WITH ALFIN AND TIN COAT ... Application: all
Injector Nozzle 0 433 175 271 DSLA143P970 Application: cadillac, Chery, ...
OEM No: 0 433 1 ...
Fuel Injector 23670-30300 Denso Oem Diesel Systems ... Application: toyota 2KD-FTV
OEM No: 23670-3 ...
Mercedes-Benz Truck Sleeve, Nozzle Holder 35201700 ... Application: Mercedes-Benz Ac ...
OEM No: 3520170 ...
Diesel Fuel Injector Nozzle 23670-09060 For Toyota ... Application: hilux vigo
OEM No: 23670-0 ...
Nozzle Holder (For Diesel Fuel Injector Injection ... Application: mitsubishi
OEM No: L200 14 ...
CCEC Cummins3054233 Injector OEM No: 3054233
Marine Nozzle, 6x0.3x130,5x0.5x140 Application: MT
OEM No: 5x0.5x1 ...
Sinotruk Howo Auto Parts 61560080255 Injection Noz ... Application: Sinotruk(cnhtc)- ...
OEM No: 6156008 ...
Didn't find what you are looking for?
Please send us Your Search Requirement, or you can Post a Buying Lead,
suppliers may contact you actively.

Send Message