Quick Details

• Place of Origin:

  China

• Samples:

  Charge

• Delivery Time:

  25-30days

• Packing:

  gift box/pc

• Delivery Port:

  Ningbo

• Max. Production Capacity:

  20000pcs/month

• Export Ratio:

  91% - 100%

• OE Experience:

  No

Product Name:Air Flow Meter 0 280 218 012

Air Flow Meter 0 280 218 012

Application

Mercedes Benz/ C Class(china); Mercedes Benz/ E Class(china); Mercedes Benz/ G Class; Mercedes Benz/ M Class; Mercedes Benz/ A Class; Mercedes Benz/ R Class; Mercedes Benz/ Gl Class; Mercedes Benz/ Cls Class; Mercedes Benz/ Clk Class;

Product Description:

OEM No/Model: 0 280 218 012

MAF Mass Air Flow Sensor,Mass Air Flow Meter,MAF Sensor,Auto Senor

BOSCH:0 280 218 012

Application temperature: -40+125°c

Work voltage:14V DC

Electric current :equal or lesser than350mA

Output voltage05v

MHK 101070

1640-PDD-X00

APPLICATION:

LANDR

Ferra 360 modena(131)360  fi 03

Ferra 360 modena spider(131) 360  02 .00

Honda accord vll(cg)2.0 turbo 02. 9

Mg mg zs 2.0 tg01. 04

Rover 200(rf)200sdi ll. 95-03.00

Rover 25 (rf)idr 10.991) Hot-film sensor head: It is our company independently developed by platinum, material taken from American well-known manufacturer of electronic slurry, in order to ensure the products have a good temperature probe.

(Temperature coefficient: 3850ppm; and response time15ms)
296%AL2O3,
 
2Aluminum Ceramics Substrate(96% AL2O3 )with high dielectric constant substrate and good conductivity-temperature performance, to ensure that the circuit perform stability in high-low temperature state. General factory with using epoxy board (low prices)but Thermal performance is not very good.
 
3) The main circuit board: Used the technical of  thick film Hybrid Integrated Circuit,which is commonly used in developed countries in the international area, thick-film resistors with higher resistance accuracy (3%) and a smaller temperature coefficient (less than 100ppm)
 
4) All the devices and materials are strictly accordance with the Automotive Industry Standard: -40 ~ 125 degrees

5) Surface Mount Technology and advanced metal bonding process: the main circuit board using surface mount technology for all devices, then hot-air reflow soldering. Sensor head and the main circuit board use spun gold binding; between the main circuit board and the bracket using Si-Al-wire binding. Ensures that the circuits can good bonding when in an instant case of over current.
 
6). Advanced laser function testing equipment makes sure the products with good consistency and stability before sales.
 

7) Perfect means of detection and the silicone rubber sealing make our products have better capacity of shock resistance and Moisture resistance and heat resistance.

8) Products through strict aging screening, to avoid premature failure of products flow into the marke


 

NingBo Gemi Energy Technology Co.,Ltd are professional supplier in exporting auto parts, and we have built good business relationship with European and American countries. Our main product include engine systerm,fuel syster,fitler systerm,ignition systerm,brake systerm,body&accessores.As good ...[Read More]

Company Profile:

• Main Product:

  Fuel Pump, Fuel pump assembly, Fuel Injector, Fuel Filter, Air Filter, Oil Filter, Filter element, Iginition coi, Spark,plug,Alternator, Starter, Oxygen Sensor, Ignition Coil, Brake Pad, Brake Disc, Clutch Disc, Clutch Cover,Cooling pipe,Fan,Electronic pump,Thermostat, Body accessories

• Business Type:

  Manufacturer

• Current Export Market:

  North America, South America, Western Europe, Eastern Europe, Eastern Asia, Southeast Asia, Mid East, Africa, Oceania

• Total Annual Sales:

  USD 1,000,001 - 2,000,000

Factory Profile:

• Number of Employees:

  Less than 50 People

• Shift:

  3

• Size of Factory In Square Meters:

  80000

• Years of OEM Experiences:

  10

• Equipment Name:

  Testing machine, Testing machine

Research & Development:

• Capability for Synchronized Development:

  Develop according to drawing or samples provided by clients?Yes

  Develop 3-D model and prototype according to client's needs?Yes

• Lead Time for New Product Development:

  30 days

• Tooling Design:

  Design Internally, Outsourcing or Cooperation

• Source of Tooling:

  Made Internally, Outsourcing

• Software/Profile:

  Unigraphics, AUTOCAD, Autodesk Inventor, Pro/E, Catia