TNA company is a professional manufacturer in power source products such as stabilizer, UPS, inverter and so on.. Ten years has passes by, our company has developed as a producer, designer and exporter of power source products
This stabilizer had export to:Russia,Africa,Middle East and so on.
Our company welcome your order for this product.
AC automatic voltage stabilizer Detailed Product Description
SVC series one-phase high accuracy full automatic AC voltage stabilizers,of which the performance is composed of those of the SVC series single-phase products,the input phase system is three-phase and four-wire system,the output voltage is 220V of phase and 380V of line voltage,Within the rated capacity range ,they also can be used for the equipment of which the source voltage is single-phase 220V or three-phase 380V.
Scope of Application
Communication system Safety alarm system checkout equipment
Office equipment medical equipment industry equipment laboratory
summarize
SVC series single-phase high accuracy full automatic AC voltage stabilizers one series four main products,are such constructed they are composed of the contact type
self-coupling voltage regulator,servo moter,automatic control circuit,etc,When the voliage of the network is not steady or the load varies,the automatic sampling control circuit makes a signal to drive the servomotor to adjust the position of the carbon brush of the self-coupling voltage regulator so as to have the output voltage regulated to the rating and to obtain the steady state
Product Performance
Input voltage
150V-250V(Single phase)
Output voltage
220V and 110V(Single phase)
Stabilization Accurace
220V3% and 110V6%
Frequency
50HZ/60HZ
Debug time
(With the input voltage variation of 10%)
Efficiency
>90%
Voltage Over voltage
Phase Voltage 246V4V
Ambient temperature
-10-+40
Relative Humidity
<95%
Temperature rise
<60
Wave form distortion
No Additional Waveform Distortion
Overioad Power Factor
0.8
Dielectric strength
1500V/min
Insulation re stance
>5M
1)AC automatic voltage stabilizer
2)with CE
3)OEM is welcome
4)10 years experience for producing it