Auto Sprag Freewheel
Application:Auto
Model: ASNU25
freewheel (ASNU25) is a sprag type one way clutch.it is used for printing machine .it is low noise,long Life and large Torque.
Freewheel (ASNU25) is a sprag type one way clutch.it is used for printing machine and conveyors.it is non bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation.
Nominal outside diameter is the same as a series 63 ball bearing.
A typical arrangement is to install this type alongside a bearing within the same location tolerance as shown on the following page.
The inner race is keyed to the shaft. The outer race has a positive n6 tolerance. to give a press fit in a H7 housing. Additional side notches in the outer race provide for positive torque transmission.
If the housing is to K6 tolerance, use of the notches is not necessary, but the housing must be strong enough to not expand after assembly.
The design can accept an axial misalignment of inner and outer race of ±S2.
Related Product Tags:
clutch flywheel , engine flywheel , fly wheel , fly wheel assembly , fly wheels , Clutch Assembly Flywheel , Assembly Flywheel , Alloy Flywheel , Tatra Flywheel , Plate Flywheel , System Flywheel , Gear And Flywheel , Flywheel Flywheel , Double Flywheel , DAEWOO Flywheel , Cummins Gear Flywheel , Man Flywheel , MASS Flywheel