Quick Details

• OE Experience:

  No

Product Name:Cylinder Head

Cylinder Head

Application

N/A

Product Description:

The cylinder head is a four-cylinder unit, made of alloy cast iron. The water chamber of the head must be withstood 392kPa (4kgf / cm ) hydraulic pressure test, at least for 3 minutes without any leakage. The head inlaid with intake/exhaust valve and guide pipe, the head cover is on the top plane, on which there is oil filler. Cylinder gasket is put on the joint between the bottom of the head and the top of the block, it becomes gas sealed chamber under high strength bolts of the head, allow the incendiary gas to push piston acting instead of leak off, meanwhile, it is also has the function of sealing for the circulated cooling water and the pressure oil which goes to the head lubrication rocker mechanism. So it has higher requirement for the seal ability and heat-resisting of the gasket. Compound plate gasket is used in this engine, the edge of the cylinder bore is covered with steel sheet, steel wire retainer is inside, the edges of water hole and oil hole are all covered with copper sheet or have special treatment, which have very good sealing ability and higher life time.

Dongfeng Chaoyang Diesel Co., Ltd. (DCD) is located in Chaoyang City-an ancient city in the west of Liaoning Province, China. With annual output of 210,000 units of diesel engines, DCD is a nationally large-scale, professional and key manufacturer integrating the development, production and sale of ...[Read More]

Company Profile:

• Main Product:

  102 series diesel engine, 3L series diesel engine, D-series diesel engine, CNG & LPG series diesel engine and spare part for engine

• Business Type:

  Manufacturer

• Current Export Market:

  South America, Southeast Asia, Mid East, Africa

• Total Annual Sales:

  More than 100,000,000

Factory Profile:

• Number of Employees:

  Above 2000 People

• Shift:

  2

• Size of Factory In Square Meters:

  95000

• Years of OEM Experiences:

  20

• Certification:

  TS16949, ISO 14001, OHSAS18001

• Equipment Name:

  Honing machine from Germany, Russia milling machine, Polishing machine from Germany, Italy Conrod machine, Washing machine from Japan, Machining center from Japan, Air-impulse moulding line from Germany, Japan Mazak machining center

Research & Development:

• Capability for Synchronized Development:

  Develop according to drawing or samples provided by clients?Yes

  Develop 3-D model and prototype according to client's needs?Yes

• Lead Time for New Product Development:

  3 weeks

• Tooling Design:

  Design Internally, Outsourcing or Cooperation

• Source of Tooling:

  Made Internally, Outsourcing

• Software/Profile:

  AUTOCAD, Pro/E, Others