Global Auto Parts & Accessories Marketplace
Home » Product Directory » Electricity & Electronics » Electronics Parts » ECU »

ECU Testing Tool For Audi

Quick Details

  • Voltage:

    0-10v

  • OE Experience:

    No

Product Name:ECU Testing Tool For Audi

ECU Testing Tool For Audi

Application

Audi

Product Description:

ECU TESTING TOOL

The Examine-Analyzing Equipment of Automobiles EECS and ECU

Equipment Description

ECU TESTING TOOL , testing-analyzing equipment of automobiles EECS and ECU, is specially designed for engineers who repair automobiles EECS and ECU. It is a handset and also can be used at worktable. It includes electric-control analyzing equipment and signal generator. According to the common characteristic if automobiles EECS, the equipment can simulate 8 kinds of signals to meet the demands of diagnosing work. Moreover, the equipment can simulate 3 kinds of independent, changeable signal combination at the same time. The equipment is designed on the basis of electric-control principle and repairing regularity, so it can also be a useful teaching tool to grasp Automobile-Electric technique in automobile repairing skill training.

The function of simulating sensor signal:
1. 58+2 signal (58Hz-900Hz), simulate crankshaft position signal.Have 2 shifts: 5Vpp, 10Vpp.
2. Sin wave signal (20Hz-900Hz), simulate car speed,gear speed, have 2 shifts: 5Vpp, 10Vpp.
3. Rectangle wave (10Hz-10KHz), simulate various kinds ofdigital signals, have2 shifts: 5Vpp, 10Vpp.
4. One way changeable resistance signal(50-10K), simulate cool water temperature, loopy electric potential utensil knob(12) precisely adjusts tooutput
5. Oneway changeable voltage signal(0-10V),simulate various kinds of voltage signals; loopy electric potential utensil knob (12) precisely adjusts to output.
6. PWM signal (5Hz200Hz; 5%90%), frequency, DUTY can be adjustedindependently. Puls and quite the contrary output.(simulate Cylinder Identification signal, ignition module input signal.
7. PWM drive signal (5Hz200Hz.5%90%,20A) driveinjector, ignition coil, EGR solenoid, IAC MOTOR, etc.


The function of measuring:
1. Examine external injection pulse width. (0.00-99.99ms)
2. Examine external voltage (0-10V).
3. Examine external signals frequency (0-9999Hz).
4. Examine external signals DUTY (5%-100%).
5. Examine external impulse with flashing LED.


The function of active testing:
1. When simulating signals like voltage, resistance, frequency, you can observe injection pulse width simultaneously.
2. You can examine the injection pulse width of an engines starting status.
3. By means of observing injection pulse width (ms), you can do these tests to the Electronic Fuel Injection engine:
Add rich mixture at cold starting;
Add rich mixture at running;
Add rich mixture at Idle;
Adjust AFS;
Feed back capability test of Oxygen signal under closed loop status;
Sever Fuel test; MAP test; etc.
4. You can test the battery voltage of the engines stating status.
5. When observing signals frequency and pulse width, you can examine signals voltage and DUTY at the same time.
6. The blue LED can do the induce test of ignition high tension.

 Function

1,Measure Pulse Width:
2. Measure Signals Frequency (Hz)
3. Measure Engines Injection Pulse Width (ms)
4. Measure the Voltage:
5. Measure the Digital Signals DUTY
6. External Signals LED Test.
7. Simulate Output the Voltage Signal and Resistance Signal.
8. Simulate Output the Frequency Signal.
9. Simulate output the PWM signal.
10. Simulate Output the PWM Drive Signal.
11. The Active Test of the Equipment.

ABBREVIATIONS IN THIS MANUAL:
EECS:Engine Electronic Control System
ECU:Electronic Control Unit
EGR: Exhaust Gas Recirculation
PWM: Pulse Width Modulated       
AFS:Air Flow Sensor
A/F: Air-Fuel Ratio                 
IAC:Idle Air Control

 
 

Send your message to this supplier:

logo Ms. Tracey Zhao
Enter between 20 to 3,000 characters, English only.

Supplier Details

Guangzhou Autofocus Trade Co. , Ltd

Market Type: After Market 
Business Type: Distributor/Wholesaler
Main Product: Auto Maintenance , Key Programmer , Diagnostic Cables, Mileage Correction

You May Like:

ICS TRIPLEX T8480 Application: ICS TRIPLEX T848 ...
High Quality LK-3610100 BYD ECU For Sale Application: BYD
OEM No: LK-3610 ...
HIMA HIMatrix F2 DO 16 01 F2DO1601 Application: sales2@amikon.cn ...
NEW SEALED Bachmann MC205 PLC DCS Module In Box Application: NEW SEALED Bachm ...
OEM No: NEW SEA ...
Immo Compiler Tool Application: Alfa Romeo, Audi ...
Ssangyong Auto Parts SSANGYONG Airbag Control Unit ... Application: ssangyong
OEM No: 8625034 ...
VOLVO RENAULT Truck VECU 20758801,20758798,2131371 ... Application: VOLVO RENAULT Se ...
OEM No: 2075880 ...
ZOTYE Accessories Engine Computer Board 3612010-02 Application: Zotye
OEM No: 3612010 ...
Zxauto Grand Tiger Landmark AT750 ECU Assy 3621010 ... Application: Zxauto Lankmark ...
OEM No: 3621010 ...
Didn't find what you are looking for?
Please send us Your Search Requirement, or you can Post a Buying Lead,
suppliers may contact you actively.

Send Message