Welded Plate GUH 62 Universal Joints For HINO OEM: 3-302-3403-01:

1.OEM No/Model:  OEM:3-302-3403-01/GUH 62
2.Material:20Cr, Gcr15
3.Size:47*138mm
3.Good quality low price
4.Good hardness
5.Universal Joints fo HINO  

2.Material:

    Normally we are using 20Cr or 20CrMnTi gear steel, as Chinese standarded alloy steel for the cross spider of our universal joint cross assembly and the glove bearing is also based on such material. Also we can make the u-joint as you requested material when the quantity is acceptable for production lot. For the needle roller, the material will be GCr15 bearing steel. High-quality materials are used for our accessarries such snap ring, NBR seal rings, straight or jointed hydraulic grease nipples, and general purpose lithium base grease for automobile.

3. Application:
     A power transmission universal joint cross assembly is widely used in automobile types including: middile and high end salon, off-road vehicles, most of the trucks, agriculture machinery, mine and heavy-duty machine, specifical purpose vehicles

A universal joint, universal coupling, U joint, Cardan joint, Hardy-Spicer joint, or Hooke's joint is a joint or coupling in a rigid rod that allows the rod to 'bend' in any direction, and is commonly used in shafts that transmit rotary motion. It consists of a pair of hinges located close together, oriented at 90° to each other, connected by a cross shaft.
 

4.  Feature:
     A universal joint is fitted between the driveshaft and the differential axle to transmit power through the axis of rotation. Perfectly smooth rotation is required, in order to handle the constantly changing angles of the rear axle caused by the vertical movement of uneven surfaces transmitted through the suspension system. In other words, a universal joint efficiently transmits power through both fixed and fluctuating angles. Moreover, since the universal joint is lightweight and compact with superior durability, it has proved to be a safe and positive product for power transfer in Automotive and Industrial applications. In recent years, we have been working to develop and produce the press type bearing which is aimed at improvement in intensity and durability and reduces cost further.

5.General Cap Design:

Non-Wing Type
Wing Type

6.Measuring Universal Joint
Steps:
1. Remove bearing cap
2. Remove excess grease from bottom of the bearing cap and trunnion
3. Remove seal ring from bearing cap or trunnion
4. Reinstall the bearing cap on trunnion
5. Measure as follows:
allow a tolerance of
.005 for dimension b
003 for all others

7. Related other part NO.:
 

Xiamen L&Z IMP.&EXP Co., Ltd is one of big comprehensive manufacturer enterprise established in 1999. Through near 10 years effort and struggle, it already has become a professional integrating innovation, manufacture, science with after-service corporation, We have passed the certification of ISO9001:2000 in 2000. In order to produce high-quality products we imported the advanced manufacturing equipments and established developed experimenting labs, and entirely produce abide by ISO9001 international standard quality system requirements , at the same time company refers to latest ERP computer management system together with Six Sigma , make the disqualification rate greatly reduced. We believe that our company will grow