NEW AUDI KEY REMOTE TRANSMITTER FLIP KEYLESS ENTRY FOB 4D0 837 231 P FOR A4 A6 What is it ?- This is a replacment KEY REMOTE TRANSMITTERflip keyless entry.
Condition: New but not in the dealer package. Also comes with a working battery and has been tested.
Buttons: (4) Lock, unlock, trunk and panic on the side.
Compatibility: Works with the vehicles listed below:
2001-2005 AudiA4
2005 AudiA4 Quattro
2001-2003 AudiA4 Quattro
2001 AudiA6
2001-2005 AudiA6 Quattro
2004-2005 AudiA8 Quattro
2001-2002 AudiA8 Quattro
2001-2002 AudiAllroad Quattro
2004-2005 AudiAllroad Quattro
2003 AudiRS6
2001-2002 AudiS4
2004-2005 AudiS4
2003 AudiS6
2002-2003 AudiS6
2001-2003 AudiS8
2001-2005 AudiTT
2001-2005 AudiTT Quattro
Please match the numbers below with your current key to ensure it matches.
Numbers on the Audi remote : 4D0 837 231 P
How can I programming this Audi Flip Remote Key?
We can offer is for the remote portion only to make the remote central work on the car. To start the car it will have to go to a dealer or a locksmith for programming. There is no manual way for a user to do it themselves.
A maximum of 4 keys/remote transmitters can be programmed (one at a time)
Memory positions of existing keys/remote transmitters can be identified using diagnostic equipment.
If diagnostic equipment available: locate vacant memory position for new key/remote transmitter. Locate memory position of key/remote transmitter to be replaced. Carry out programming procedure for this key/remote transmitter only.
If diagnostic not available:obtain and reprogra all key/remote transmitters.Note: existing key/remote transmitter memory positions will be overwritten.
Switch ignition ON. Use key not fitted with remote transmitter.
Manually lock drivers door using key.
Within 5 seconds press UNLOCK button on first key/remote transmitter once (programs memory position 1)
Indicator lamps flash once to indicate signal received.
Wait 5 seconds.
Press UNLOCK button once to confirm programming.
Vihecle unlocks.programming mode deactivated.
Switch ignition OFF. Remove key.
To program maining keys/remotes transmitters into memory positions 2,3 and 4.carry out the complete procedure below for each key/remote transmitter.
Note: ignition must be switched OFF between each key/remote transmitter programming precedure.
When and how can to procedure Memory erase?
When you lost your remote transmitter, or lost key fitted with remote transmitter,even incorrect number of keys/remote transmitters supplied with vehicle. You need to erase the memory.
Switch ignition ON.
Manually lock drivers door using key.
Press UNLOCK button 5 times,at 1 second intervals.
Indicator lamps flash once evry time UNLOCK button is pressed.to indicate signal received.
Wait 6 seconds.
Press UNLOCK button once (to confirm erase procedure)
Switch ignition OFF.remove ignition key.
Key/remote transmitter should no longer operate system.
Obtain and program all keys/remote transmitters.
Shipping: