OEM No/Model: ATP042
VAS 5054A PDU42 PRO with Original OKI chip supports PDU API V42
Autoscanner for dealer diagnostics and programming of Audi, VW, Skoda, Seat, Bentley, Lamborghini.
Our device passes the test in the VAS-PC self-diagnosis program without errors!
And it works with the latest version of PDU42 without patches and fixes!
We provide everything you need for a comfortable start! Program + license + drivers + step-by-step installation instructions. The latest version of ODIS service 6.2 and ODIS Engineering 12 is provided with a direct download link. (Also available is ODIS service 7.1.1)
Optionally, the software can be written to a 32 GB USB flash drive .
Additional software:
- link or USB Flash 32Gb Mercedes dealer diagnostics via VAS5054
- link or USB Flash 32Gb dealer diagnostics for Honda, Toyota, Ford, Mazda High resolution
Full support for all VW, Audi, Skoda and Seat models until 2021, including UDS and all data buses (low and high CAN). Full support - PassThru (J2534)
Attention! We do not recommend for use in a car service, due to the lack of an LTAEF voltage regulator, an inoperative CAN-Lowspeed data bus, J1850, PWM, VPW protocols and, in general, the unreliability of components.
Why buy a professional version of VAS 5054a Pro version :
Before buying, we will perform a self-diagnosis of the device in VAS-PC, which will allow us to identify dummies and clones of microcircuits.
Works with the latest version of ODIS and PDU API v.42 without fixes and patches.
Compatible with licensed software at the dealer station. Supports work with online VAG server.
Original OKI M6636. Not M6636B and not a dummy!
Original CAN transceiver TJA1054AT. Not a fake!
Original transceiver A5780A. Not an analogue of AU5780 and not a dummy!
Original LTAEF voltage regulator. Not an analogue-cheap 5V stabilizer!
5.5 volt memory K6X4016C3F-TF55.
Infineon SAK-XC161CJ-16F40F controller.
Functioning zener diode VD7.
VAS5054 features:
- automatic recognition of the communication mode with the car
- reading and interpretation of fault codes
- erasing errors
- view the current parameters in digital or graphic
- activation of executive devices
- adaptation of blocks and actuating units
- coding of electronic blocks
- restoring the basic settings mode
- special test modes (cylinder balance, etc.)
- the ability to save and print the received data
- automatic scanning of all electronic components of the car with the output of a summary report
- diagnostics of the injection system
- fuel system diagnostics
- updating and reprogramming control units
- Guided troubleshooting
and etc.
Interface VAS5054 PRO from iDiag.by supports:
- K-line (ISO 9141-2)
- High speed CAN ISO 11898-2
- Low speed CAN ISO 11898-3
- UDS
- J1850 (SAE J1850)
- SAE/J1850/VPW
- J2534
Complete scope of supply for the VAS 5054a:
- Diagnostic scanner VAS 5054a PRO PDU42 (Full schematics on original chips);
- Bluetooth adapter connected to a USB port;
- Frost-resistant USB cable 3 meters;
- ODIS software (link + detailed installation instructions);
- Protective case for storage and transportation of the VAS-5054a scanner
Related Product Tags:
accelerator kit , airbag rester , opel airbag rester , airbag rester tool , axle boot , axle boot kit , ball end , ballcock float valve , knorr brake caliper repair kit , brake caliper repair kit , brake caliper repair kits , brake hardware kit , caliper repair kit , caliper repair kits , cng kit , cng kits , injection cng kit system , compression tester kit