OEM No/Model: ATE049
Vgate FD+ Professional Refresh Hidden Scanner Perfectly Compatible With FORscan For Ford
13+ DETECTION FUNCTION
1. Automatically lock
2. Speeding reminder
3. Emergency brake flashing lights
4. Lock the car and whistle
5. Xenon lamp mode
6. One-click skylight
7. Tire pressure monitoring
8. Snowflake logo
9. Cruise function
10. Compass
11. Average (instantaneous) fuel consumption
12.ECO energy saving mode
13. Steering power adjustment
Vqate vlinker FD+ Professionally Suitable for Forscan:
Support Programming And Diagnostic For Ford
Read / Clear
EngineDTC
Adiust Parameters
Refresh Parameters
Hidden Function Activated
Read Data Stream
Support Protocols
Multiple protocols
--15 ELM format protocols;
-- 23 STN format protocols;
-- Up to 64 user-defined protocols.
OBDII 5 standard protocols
-- SAE J1850 VPW
-- SAE J1850 PWM
-- ISO 9141-2
-- ISO 14230-4
-- ISO 15765-4 CAN
Additionalprotocols
-- SAE J1939 CAN
-- ISO 11898 (raw CAN)
--Medium SpeedMS CAN
Theseprotocolscover almost 99% of the OBDII Cars on the market
Rich instruction set, compatible with more APP software
-- Fully compatible with ELM's AT command set;
-- Fully compatible with STN's ST command set;
--39 VT macro commands, some instructions are equivalent to the effect of several AT and ST instructions, simplifying the communication steps.
-- Compatible with ELM and STN power management solutions.
-- Support for instructions, UART silence, battery low voltage, OBD bus silence, etc. Up to 5 ways to go to sleep;
-- Support UART active, battery voltage drop, OBD bus active, key, etc. Up to 5 ways to wake up from sleep mode.
-- Device sleep power consumption is less than 2 mA.
-- OBD request byte up to 48 bytes, can meet the needs of some special long framecommunication.
-- UART data buffer up to 2K bytes, baudrate increased to 230.4Kbps.
-- 256-byte storage unit
-- More than 100,000 erasable times
-- Read and write operations on any unit in the storage area by using the VT command
-- Mix ID Sending" mode of CAN protocol.
-- Optional formatted send data according to protocol
-- Multiple WM sequence settings
-- Support AT command to manually set WM sequence
-- Support for specifying a protocol or a full protocol-wide temporary WM sequence
-- Support for a permanent link between a protocol and a private WM sequence
-- Secure bootloader for easy firmware updates
Package list:
1 x Vgate vLinker BT3.0
1 x User manual
Related Product Tags:
accelerator kit , airbag rester , opel airbag rester , airbag rester tool , axle boot , axle boot kit , ball end , ballcock float valve , knorr brake caliper repair kit , brake caliper repair kit , brake caliper repair kits , brake hardware kit , caliper repair kit , caliper repair kits , cng kit , cng kits , injection cng kit system , compression tester kit