OEM No/Model: ATE037
This is a trolley code reading card product with the following functions:
1. Support nine standard protocols of DOBD D II/EOBD;
2. Support OBD functions such as vehicle fault diagnosis and real-time data streaming;
3. With data playback functions such as viewing the saved fault code information, data flow and battery detection;
4. Data with emission testing
5. The data saved in the code reading card can be printed through the USB serial port;;
6. Support USB upgrade function
7. German, Dutch, English, Spanish, French, Italian
8. Quickly test the cold start current, internal resistance, battery life and remaining power of the 12V start-up lead-acid battery to determine whether the battery needs to be replaced.
Battery: real-time voltage detection, battery impedance detection, how much battery is left after a period of time when fully charged (SOC), the current value of battery charging (SOH),
Cold start current detection (CCA)
Supported protocol
SAE 0 J1850 PWM (6 41.6 Kbaud)
SAE 0 J1850 VPW (4 10.4 Kbaud)
ISO 9141-2 (5 5 d baud 4 init, 10.4 Kbaud)
ISO 4 14230-4 KWP (5 5 d baud 4 init, 10.4 Kbaud)
ISO 4 14230-4 KWP (t fast 4 init, 10.4 Kbaud)
ISO 4 15765-4 CAN (t 11bit 0 ID, 500 Kbaud)
ISO 4 15765-4 CAN (t 29bit 0 ID, 500 Kbaud)
ISO 4 15765-4 CAN (t 11bit 0 ID, 2500 Kbaud)
ISO 4 15765-4 CAN (t 29bit 0 ID, 250 Kbaud)
Supported vehicle data
* Read error diagnosis code
* Clear fault code (off clear error code and turn off MIL)
*Engine revolutions per minute (RPM)
*Calculated load value
*Coolant temperature
*Fuel system status
*Vehicle speed
*Short-term fuel situation
*Long-term fuel situation
*Inlet Manifold Pressure
*When spraying ahead
*Intake air temperature
*Air velocity
*The absolute position of the throttle valve
*Oxygen detection voltage associated with short-term fuel state
*Fuel system status
*Fuel pressure
*Fuel consumption monitoring, etc.
Note: The number of data items supported by different model years is also different, subject to actual support
technical parameter
Main control chip: STM32F103VET6
Working voltage: DC 12V
Working current: 98 mA
Operating environment: -20 70
Storage temperature: -20 80
Dimensions: 181.5 * 81 * 29 mm
Product weight: 168g
Related Product Tags:
accelerator kit , airbag rester , opel airbag rester , airbag rester tool , axle boot , axle boot kit , ball end , ballcock float valve , knorr brake caliper repair kit , brake caliper repair kit , brake caliper repair kits , brake hardware kit , caliper repair kit , caliper repair kits , cng kit , cng kits , injection cng kit system , compression tester kit