Product Name:Mitsubishi Mut3 Y12

Mitsubishi Mut3 Y12

Application

Mitsubishi/ Pajerosport(china); Mitsubishi/ Outlander(china); Mitsubishi/ Lancer(china); Mitsubishi/ Gallant(china);

Product Description:

OEM No/Model: Y12
Basic Functions:
The MUT3 can be utilized for all types of vehicle electronic control units (incorporating the diagnostics function).
The MUT3 reads each diagnostic code and displays it as a name.
Using serial communications, the MUT-III reads the RAM data (data list) within the ECU that is required for servicing, thus enabling the display of both graphs and numeric values converted to physical quantities. (Only for ECUs that support serial communications.)
The MUT3 can forcibly drive or forcibly stop the actuators required for servicing. (Only for ECUs that support serial communications.)
Using its voltage measuring function, the MUT-III can measure DC voltage ranging from +/-40V.
Using its resistance measuring function, the MUT-III can measure resistance ranging from 0 ~ 100kOhm.
 
V.C.I. Function Fault Diagnosis:
The V.C.I. can perform fault diagnosis by receiving commands from a PC and communicating with a vehicle ECU. The buttons on the V.C.I. will not function while it is connected to a PC. [Start-up Screen]
The screen to the left will be displayed when the USB cable is connected to the main unit. The direction of signal flow between the PC and the V.C.I. will be indicated by an arrow, such as [P->V] or [P<-V].
 
MUT3 PC software application supports following languages:
English, Czech, French, German, Greek, Italian, Spanish, Turkish, and Russian.
 
Set Includes:
(1) Vehicle Communication Interface (V.C.I.) (MB991824)
A communication interface used to connect the vehicle ECUs and the PC.
 
1. When connected with the PC
- Vehicle diagnosis (Interactive fault diagnosis)
- SWS communication; CAN communication support
- Drive recorder
- Volt, Ohm, measurement
- Fuel pressure measurement (Not available in US)
 
2. When used with the V.C.I. unit (disconnected from PC)
- V.C.I. Stand-alone diagnosis
- Drive recorder
- ECU reprogramming
- Volt, Ohm measurement
- Belt Tension measurement
(2) Memory Card
Stores data for ECU reprogramming, drive recorder, etc.
This is a standard, off-the-shelf memory card. The one provided (with reprogramming data) is a Compact Flash memory card (MB991853) inserted into the CF card adapter (MB991939).
(3) MUT3 Main Harness A (MB991910)
Used when connecting the V.C.I. with vehicles that have only one 16-pin diagnosis connector.
- Supports fault diagnosis and ECU updating on the above-described vehicles
- Supports the CAN communication system
(4) MUT3 Main Harness B (MB991911)
Used when connecting V.C.I. with vehicles that have a 16-pin + 12-pin or 16-pin + 13-pin diagnosis connector.
For models equipped with only 12-pin (or 12-pin + 12-pin) diagnosis connector, connect the M.U.T.-II adapter harness (MB991498) to the end of this harness in the same as M.U.T.-II, and power is supplied from the cigarette lighter socket.
(5) Carrying case
MUT3 manual
SMV manual
PLEASE CONTACT US!

ANYSCAN is a global supplier of automotive diagnostic tools. As one of the professional suppliers of auto diagnostic tools, ANYSCAN has been supplying auto diagnostic tools since 2002 and has become a world-chain supplier reaching various countries such as Lebanon, China, USA, South Africa etc. In ...[Read More]

Company Profile:

• Main Product:

  Mitsubishi Mut3, Subaru Select Monitor Iii, Toyota It2, Scania Vci 2, Truck Diagnostic Tools

• Business Type:

  Manufacturer

• Current Export Market:

  North America, South America, Western Europe, Eastern Europe, Eastern Asia, Southeast Asia, Mid East, Africa, Oceania

• Total Annual Sales:

  USD 500,001 - 1,000,000

Factory Profile:

• Number of Employees:

  51 - 100 People