Product DescriptionFor MAZDA 6 RX-7 Protege Mazdaspeed Brake Pad FB06-49-280 D3027
TOPONE Disc Brake Pads | |||
Working Life | 30,000-50,000 Kms | Packing | 4/8 PCS PER SET; 10 SETS PER CARTON |
Friction µ | 0.35-0.55 | PVC Plastic Rolling | |
Brand | TOPONE or Customer Brand | Topone Box(See picture below) | |
Customer Requested Box | |||
Description | |||
1. Advanced Friction Formula. | |||
2. 100%Positive Mould Technology. | |||
3. Consistent Friction Material Density. | |||
4. 100% Scorched, No Break-in Required. | |||
5. Low Fade, Long Life Guaranteed ( 30,000-50,000 Kms ). | |||
6. Quiet&Superior Braking Performance. | |||
7. OE Designed Shimes Ensure Noise-Free Braking.
Packing Display
|
Our Products Advantage
Noiseless, Steady Friction Coefficient, No Dust, Resist Wearing, Long Life-span, Strictly Detection and Inspection System.
TOPONE Auto Parts Manufactury Co., Ltd. was found in 2011. We are a big manufacturer of disc brake pads & drum brake shoes for cars, trucks, trailer, cv, buses...
We have exported our products to Europe, Middle East, North America and Asia...
Also we have our own development the highest quality products with kinds of formula to meet any of your requriements.
How To Installation
If You Hear The Squealing Sound, Please Replace Your Brake Pad.
1.If You Hear The Squealing Sound, Please Replace Your Brake Pad.
How To Installation By Youself?
FRONT BRAKE (DISC) REMOVAL/INSTALLATION
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
3. After installation, pump the brake pedal a few times and verify that the brakes do not drag.
1 | Brake hose (See Brake Hose Installation Note.) |
2 | Retaining clip |
3 | Cap |
4 | Bolt |
5 | Caliper |
6 | Boot |
7 | Disc pad (See Disc Pad Installation Note.) |
8 | Bolt |
9 | Mounting support |
10 | Washer |
11 | Disc plate |
Disc Pad Installation Note
1. Clean the exposed area of the piston.
2. Push the piston in using the SST.
3. Install the disc pad (outer side) to the mounting support.
4. Install the disc pad (inner side) to the caliper.
Brake Hose Installation Note
1. Install the brake hose to the caliper.
2. Tighten the flare nut while holding the brake hose at point A with a spanner or equivalent.
3. Verify that the brake hose is not twisted.
Our ServicesChat Now Contact Supplier
Related Product Tags:
brake block , brake pad box , cars and bus brake pad , brake pad disc semi metal , brake pads mk , long life brake pad , toyota brake pad , brake padel , brake pads pl , brake pads production lining , brake pads sensor , benz brake pad , benz brake pads , automobile brake pad , bus brake pad , bus brake pads , c v brake pad , bmw brake pad